OP265WPS Datasheet, PDF (1/3 Pages) OPTEK Technologies – Plastic Infrared Emitting Diode

Plastic Infrared Emitting Diode
OP265WPS
Features:
• T-1 (3 mm) package style
• Broad irradiance pattern
• Point source with flat lens
• Higher power output than GaAs at equivalent drive currents
• 850 nm diode
Description:
The OP265WPS point source model is a flat-lensed 850 nm diode with a broad radiation pattern that provides
relatively even illumination over a large area. Its stable forward voltage (V_F) vs. temperature characteristic makes
this device appropriate for applications where voltage is limited (such as battery operation), while the low rise time/
fall time (t_r/t_f) makes it ideal for high-speed operation.
OP265 devices conform to the OP505 and OP535 series devices.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data.
Applications:
• Space-limited applications
• Applications requiring coupling
efficiency
• Precision optical designs
• Battery-operated or voltage-limited
applications
Ordering Information
Part
Number
LED Peak Output Power (mW/ I_F (mA) Total Beam Lead
Wavelength
cm²) Min / Max
Typ / Max Angle Length
OP265WPS 850 nm
.055 / .55
20 / 50
120°
0.50"
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
1
2
Pin #
1
2
LED
Cathode
Anode
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using
ND Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing structural
failure in OPTEK'S molded plastics.
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A 07/06
Page 1 of 3