OP265AA Datasheet, PDF (1/3 Pages) OPTEK Technologies – Plastic Infrared Emitting Diode

Plastic Infrared Emitting Diode
OP265AA Series
Features:
• T-1 (3 mm) package style
• Narrow irradiance pattern
• Dome lens
• Higher power output than GaAs at equivalent drive currents
• 850 nm diode
Description:
Each device in the OP265AA series is a high intensity gallium arsenide infrared emitting diode (GaAIAs) that is
molded in an IR transmissive clear or amber-tinted epoxy package with a dome lens. Devices feature a narrow
source irradiance pattern and a variety of electrical characteristics. The small T-1 package style makes these
devices ideal for space-limited applications.
These devices are mechanically and spectrally matched to other OPTEK products as follows:
OP265 devices conform to the OP505 and OP535 series devices.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data.
Applications:
• Space-limited applications
• Applications requiring coupling
efficiency
• Battery-operated or voltage-limited
applications
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
Ordering Information
Part
LED Peak Output Power (mW/ I_F (mA) Total Beam Lead
Number Wavelength
cm²) Min / Max
Typ / Max
Angle Length
OP265AA
OP265AB
OP265AC
OP265AD
850 nm
6.0 / NA
8.0 / 12.0
12.0 / 16.0
16.0 / NA
20 / 50
18°
0.50”
1
2
Pin #
1
2
LED
Cathode
Anode
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using
ND Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing structural
failure in OPTEK'S molded plastics.
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A 07/06
Page 1 of 3