OP240_14 Datasheet, PDF (1/3 Pages) OPTEK Technologies – Plastic Infrared Emitting Diode

Plastic Infrared Emitting Diode
OP240 Series
OP245 Series
Features:
• Wide irradiance pattern
• Side-looking package for space-limited applications
• Wavelength matched to silicon’s peak response
• Mechanically and spectrally matched to other OPTEK products
OP240 OP245
Description:
Each device in this series is a high intensity gallium aluminum arsenide infrared emitting diode that is suited for
use as a PCBoard mounted slotted switch or an easy mount PCBoard interrupter.
Each dome lens OP240 and OP245 device is an 890 nm diode that is molded in an IR-transmissive clear epoxy
side-looking package. OP240 is mechanically and spectrally matched to the OP550 and OP560 series of
phototransistors. OP245 is mechanically and spectrally matched to the OP555 and OP565 series devices.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data.
Applications:
• Space-limited applications
• PCBoard mounted slotted switch
• PCBoard interrupter
OP240 (A, B, C, D)
Part
Number
OP240A
OP240B
OP240C
OP240D
OP245A
OP245B
OP245C
OP245D
Ordering Information
LED Peak
Wavelength
Lens
Type
Total Beam
Angle
Lead
Length
Dome
890 nm
40°
0.50"
minimum
Recessed
1
2
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
Pin # LED
1 Cathode
2 Anode
RoHS
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using
ND Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing structural
failure in OPTEK'S molded plastics.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
FAX: [phone] [e-mail] www.optekinc.com
Issue A.1 01/07
Page 1 of 3