TRPBFELXTBOSH Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Single Fiber Bi-Directional Fast Ethernet SFP Single Mode Transceivers

OCP
TRPBFELX
Single Fiber Bi-Directional Fast Ethernet
SFP Single Mode Transceivers
Features
; Compatible with SFP MSA
; Compliant with IEEE 802.3ah Draft 3.3 Fast Ethernet
100BASE-BX10 PMD Specifications
; 1310nm and 1550nm Wavelengths
; Distances up to 10km over Single Mode Fiber
; -40°C to +85°C Operating Temperature Range Option
; Eye Safe (Class I Laser Safety)
; Duplex LC Optical Interface
; Hot-pluggable
; TX Fault & Loss of Signal Outputs
; TX Disable Input
; Single +3.3V Power Supply
Description
The TRPBFELX modules are single fiber, bi-directional SFP
transceivers that provide a quick and reliable interface for
100BASE-BX10-D/U Fast Ethernet applications.
Two types of modules are available: the 1310nm Fabry
Perot laser-based transceiver (BX10-U) and the 1550nm
Fabry Perot laser-based transceiver (BX10-D). All modules
meet Class I Laser Safety requirements in accordance with
the U.S. and international standards as described in the
FDA/CDRH and IEC-60825 documents, respectively.
The TRPBFELX transceivers connect to standard 20-pad
SFP connectors for hot plug capability. This allows the
system designer to make configuration or maintenance
changes by simply plugging in different types of
transceivers without removing the power supply from the
host system.
The transceivers have color-coded latches that identify the
TX wavelength. The MSA compliant latch offers an easy
and convenient way to release the module.
The transmitter and receiver DATA interfaces are AC-coupled
internally. LV-TTL Transmitter Disable control input and
Loss of Signal output interfaces are also provided.
The transceivers operate from a single +3.3V power supply
over an operating case temperature range of -5°C to +70°C
(“B” option) or -40°C to +85°C (“A” option). The package
is made of metal.
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature
T_st
Operating Case Temperature¹
"B" option
"A" option
T_op
Supply Voltage
V_CC
Input Voltage
V_in
1_{Measured on top side of SFP module at the front center vent hole of the cage.}
Minimum
- 40
-5
- 40
0
0
Maximum
+ 85
+ 70
+ 85
+ 4.5
V_CC
Units
°C
°C
V
V
Optical Communication Products, Inc.
1
21737-0911, Rev. B
06-23-2005