NOIS1SM0250A Datasheet, PDF (9/25 Pages) ON Semiconductor – Radiation Tolerant CMOS Image Sensor

NOIS1SM0250A
DC Operating Conditions
Table 5. DC SPECIFICATIONS
Symbol
Parameter (Notes 1, 2 and 3)
Min
Typ
Max
Units
V_{DD_ANA}
Analog supply voltage to imager part
–
5
–
V
V_{DD_DIG}
Digital supply voltage to imager part
–
5
–
V
V_{DD_ADC_ANA}
Analog supply voltage to ADC
–
5
–
V
V_{DD_ADC_DIG}
Digital supply voltage to ADC
–
5
–
V
V_{DD_ADC_DIG_3.3/5}
Supply voltage of ADC output stage
–
3.3 to 5
–
V
V_IH
Logical ‘1’ input voltage
2.3
–
V_DD
V
V_IL
Logical ‘0’ input voltage
0
–
1
V
V_OH
Logical ‘1’ output voltage
4.25
4.5
–
V
V_OL
Logical ‘0’ output voltage
–
0.1
1
V
V_{DD_PIX}
Pixel array power supply (default 5 V, the device is then
–
5
–
V
in ‘soft reset’. To avoid the image lag associated with
soft reset, reduce this voltage to 3–3.5 V ‘hard reset’)
V_{DD_RESL}
Reset power supply
–
5
–
V
1. All parameters are characterized for DC conditions after establishing thermal equilibrium.
2. Unused inputs must always be tied to an appropriate logic level, for example, either VDD or GND.
3. This device contains circuitry to protect the inputs against damage due to high static voltages or electric fields. Take normal precautions to
avoid applying any voltages higher than the maximum rated voltages to this high impedance circuit.
http://onsemi.com
9