LB11696V Datasheet, PDF (9/17 Pages) Sanyo Semicon Device – Direct PWM Drive Brushless Motor Predriver IC

Continued from preceding page.
Pin No. Pin Name
LB11696V
Pin Description
VREG
26
N1 Hall signal output (HP signal) type selector
Equivalent circuit
50 kΩ
300 Ω
26
27
N2
Hall signal output (HP signal) type selector
VREG
50 kΩ
300 Ω
27
Undervoltage protection voltage detection
28
LVS
If a 5 V or higher supply voltage is to be detected, set the
detection voltage by inserting an appropriate zener diode
in series.
V_CC
Stabilized power supply output (5 V output)
29
VREG Insert a capacitor (about 0.1 µF) between this pin and
ground for stabilization.
V_CC
28
29
30
V_CC
Power supply. Insert a capacitor between this pin and
ground for stabilization.
Page. 9