LB11660RV Datasheet, PDF (9/9 Pages) Sanyo Semicon Device – Single-Phase Full-Wave Driver

Internal Equivalent Circuit Diagram
LB11660RV
RD
VCC
Thermal
protection
circuit
VM
6VREG
Constant
voltage circuit
1.25V
HB
Control
circuit
HALL _IN+
IN-
Amplifier with
hysteresis
Charge/
discharge circuit
GND
CT
RMI VTH
Delay
circuit
Delay
circuit
Oscillation
circuit
Pre-Driver Pre-Driver
CPWM
OUT2
OUT1
M
PRE1
PRE2
ORDERING INFORMATION
Device
LB11660RV-MPB-H
LB11660RV-TLM-H
LB11660RV-W-AH
Package
SSOP16 (225mil)
(Pb-Free / Halogen Free)
SSOP16 (225mil)
(Pb-Free / Halogen Free)
SSOP16 (225mil)
(Pb-Free / Halogen Free)
Wire Bond
Au-Wire
Au-Wire
Cu-Wire
Shipping (Qty / Packing)
90 / Fan-Fold
2000 / Tape & Reel
2000 / Tape & Reel
† For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
www.onsemi.com
9