NLSX5002BMUTCG Datasheet, PDF (8/12 Pages) ON Semiconductor – 2-Bit 100 Mbs Configurable Dual-Supply Level Translator

NLSX5002
DYNAMIC POWER CONSUMPTION (T_A = +25°C)
Symbol
Parameter
Test Conditions
V_CC (V)
(Note 14)
V_L (V)
(Note 15)
Typ
Unit
(Note 16)
C_{PD_VL}
Power Dissipation V_L = Input port, V_CC = Output Port
Capacitance C_Load = 0, f = 1 MHz,
(Referred to V_L) EN = V_L (Output enabled)
0.9
4.5
13
pF
1.5
1.8
7.0
1.8
1.5
6.0
1.8
1.8
6.0
1.8
2.8
7.0
2.5
2.5
6.0
2.8
1.8
6.0
4.5
0.9
10
V_CC = Input port, V_L = Output Port
C_Load = 0, f = 1 MHz,
EN = V_L (Output enabled)
0.9
4.5
19
pF
1.5
1.8
16
1.8
1.5
16
1.8
1.8
16
1.8
2.8
16
2.5
2.5
16
2.8
1.8
16
4.5
0.9
16
C_{PD_VCC} Power Dissipation V_L = Input port, V_CC = Output Port
Capacitance C_Load = 0, f = 1 MHz,
(Referred to V_CC) EN = V_L (Output enabled)
0.9
4.5
16
pF
1.5
1.8
17
1.8
1.5
17
1.8
1.8
17
1.8
2.8
17
2.5
2.5
18
2.8
1.8
18
4.5
0.9
21
V_CC = Input port, V_L = Output Port
C_Load = 0, f = 1 MHz,
EN = V_L (Output enabled)
0.9
4.5
13
pF
1.5
1.8
6.0
1.8
1.5
7.0
1.8
1.8
7.0
1.8
2.8
6.0
2.5
2.5
7.0
2.8
1.8
7.0
4.5
0.9
15
14. V_CC is the supply voltage associated with the I/O VCC port, and VCC ranges from +0.9 V to 4.5 V under normal operating conditions.
15. V_L is the supply voltage associated with the I/O VL port, and VL ranges from +0.9 V to 4.5 V under normal operating conditions.
16. Typical values are at T_A = +25°C.
17. C_{PD VL} and C_{PD VCC} are defined as the value of the IC’s equivalent capacitance from which the operating current can be calculated for the
V_L and V_CC power supplies, respectively. I_CC = I_CC (dynamic) + I_CC (static) ≈ I_CC(operating) ≈ C_PD x V_CC x f_IN x N_SW where I_CC = I_{CC_VCC}
+ I_{CC VL} and N_SW = total number of outputs switching.
http://onsemi.com
8