NLSX5002BMUTCG Datasheet, PDF (1/12 Pages) ON Semiconductor – 2-Bit 100 Mbs Configurable Dual-Supply Level Translator

NLSX5002
2-Bit 100 Mb/s Configurable
Dual-Supply Level
Translator
The NLSX5002 is a 2-bit configurable dual-supply autosensing
bidirectional level translator that does not require a direction control
pin. The I/O V_CC- and I/O V_L-ports are designed to track two
different power supply rails, V_CC and V_L respectively. Both the V_CC
and the V_L supply rails are configurable from 0.9 V to 4.5 V. This
allows a logic signal on the V_L side to be translated to either a higher
or a lower logic signal voltage on the V_CC side, and vice-versa.
The NLSX5002 offers the feature that the values of the V_CC and
V_L supplies are independent. Design flexibility is maximized
because V_L can be set to a value either greater than or less than the
V_CC supply. In contrast, the majority of competitive auto sense
translators have a restriction that the value of the V_L supply must be
equal to less than (V_CC - 0.4) V.
The NLSX5002 has high output current capability, which allows
the translator to drive high capacitive loads such as most high
frequency EMI filters. Another feature of the NLSX5002 is that each
I/O_V_Ln and I/O_V_CCn channel can function as either an input or an
output.
An Output Enable (EN) input is available to reduce the power
consumption. The EN pin can be used to disable both I/O ports by
putting them in 3-state which significantly reduces the supply current
from both V_CC and V_L. The EN signal is referenced to the V_L supply.
Features
• Wide V_CC, V_L Operating Range: 0.9 V to 4.5 V
• V_L and V_CC are independent
− V_L may be greater than, equal to, or less than V_CC
• High−Speed with 140 Mb/s Guaranteed Date Rate
for V_CC, V_L > 1.8 V
• Low Bit−to−Bit Skew
• Overvoltage Tolerant Enable and I/O Pins
• Non−Preferential Power−Up Sequencing
• Power−Off Protection
• Small Packaging: UQFN8, 1.4 mm x 1.2 mm, 0.4 mm Pitch
• These Devices are Pb−Free and are RoHS Compliant
Typical Applications
• Mobile Phones, PDAs, Other Portable Devices
Important Information
• ESD Protection for All Pins:
♦ HBM (Human Body Model) > 8000 V
♦ MM (Machine Model) > 400 V
http://onsemi.com
UQFN8
MU SUFFIX
CASE 523AS
MARKING
DIAGRAM
AM
1
A = Specific Device Code
M = Date Code
ORDERING INFORMATION
Device
Package
Shipping^†
NLSX5002BMUTCG UQFN8 3000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2012
1
April, 2012 − Rev. 0
Publication Order Number:
NLSX5002/D