MC10EP446 Datasheet, PDF (8/20 Pages) ON Semiconductor – 3.3V/5V 8­Bit CMOS/ECL/TTL Data Input Parallel/Serial Converter

MC10EP446, MC100EP446
Table 11. 100EP DC CHARACTERISTICS, PECL V_CC = 5.0 V, V_EE = 0 V (Note 14)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
I_EE
Power Supply Current
V_OH
Output HIGH Voltage (Note 15)
V_OL
Output LOW Voltage (Note 15)
V_IH
Input HIGH Voltage (Single−Ended)
CMOS
PECL
TTL
90 110 130 90 110 130 95 115 135 mA
3855 3980 4105 3855 3980 4105 3855 3980 4105 mV
3055 3180 3305 3055 3180 3305 3055 3180 3305 mV
3500
3775
2000
5000
5000
5000
3500
3775
2000
5000
5000
5000
3500
3775
2000
5000 ^mV
5000
5000
V_IL
Input LOW Voltage (Single−Ended)
CMOS
PECL
TTL
0
3055
0
1500
3375
800
0
3055
0
1500
3375
800
0
3055
0
1500 ^mV
3375
800
V_BB
V_IHCMR
Output Voltage Reference
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 16)
3475 3575 3675 3475 3575 3675 3475 3575 3675 mV
2.0
5.0 2.0
5.0 2.0
5.0 V
I_IH
Input HIGH Current
I_IL
Input LOW Current
150
150
150 mA
0.5
0.5
0.5
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
14. Input and output parameters vary 1:1 with V_CC. V_EE can vary +2.0 V to −0.5 V.
15. All loading with 50 W to V_CC − 2.0 V.
16. V_IHCMR min varies 1:1 with V_EE, V_IHCMR max varies 1:1 with V_CC. The V_IHCMR range is referenced to the most positive side of the differential
input signal.
Table 12. 100EP DC CHARACTERISTICS, NECL V_CC = 0 V, V_EE = −5.5 V to −3.0 V (Note 17)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
I_EE
V_OH
V_OL
V_IH
V_IL
V_BB
V_IHCMR
Power Supply Current
Output HIGH Voltage (Note 18)
Output LOW Voltage (Note 18)
Input HIGH Voltage (Single−Ended)
Input LOW Voltage (Single−Ended)
Output Voltage Reference
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 19)
90 110 130 90 110 130 95 115 135 mA
−1145 −1020 −895 −1145 −1020 −895 −1145 −1020 −895 mV
−1945 −1820 −1695 −1945 −1820 −1695 −1945 −1820 −1695 mV
−1225
−880 −1225
−880 −1225
−880 mV
−1945
−1625 −1945
−1625 −1945
−1625 mV
−1525 −1425 −1325 −1525 −1425 −1325 −1525 −1425 −1325 mV
V_EE+2.0
0.0
V_EE+2.0
0.0
V_EE+2.0
0.0 V
I_IH
Input HIGH Current
I_IL
Input LOW Current
150
150
150 mA
0.5
0.5
0.5
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
17. Input and output parameters vary 1:1 with V_CC.
18. All loading with 50 W to V_CC − 2.0 V.
19. V_IHCMR min varies 1:1 with V_EE, V_IHCMR max varies 1:1 with V_CC. The V_IHCMR range is referenced to the most positive side of the differential
input signal.
http://onsemi.com
8