CM1442-06LP Datasheet, PDF (8/10 Pages) ON Semiconductor – LCD and Camera EMI Filter Array with ESD Protection

CM1442-06LP
Application Information
PARAMETER
Pad Size on PCB
Pad Shape
Pad Definition
Solder Mask Opening
Solder Stencil Thickness
Solder Stencil Aperture Opening (laser cut, 5% tapered walls)
Solder Flux Ratio
Solder Paste Type
Pad Protective Finish
Tolerance — Edge To Corner Ball
Solder Ball Side Coplanarity
Maximum Dwell Time Above Liquidous
Maximum Soldering Temperature for Lead-free Devices using a Lead-free Solder
Paste
VALUE
0.240mm
Round
Non-Solder Mask defined pads
0.290mm Round
0.125mm - 0.150mm
0.300mm Round
50/50 by volume
No Clean
OSP (Entek Cu Plus 106A)
+50µm
+20µm
60 seconds
260°C
Non-Solder Mask Defined Pad
0.240mm DIA.
Solder Stencil Opening
0.300mm DIA.
Solder Mask Opening
0.290mm DIA.
Figure 8. Recommended Non-Solder Mask Defined Pad Illustration
Figure 9. Lead-free (SnAgCu) Solder Ball Reflow Profile
Rev. 3 | Page 8 of 10 | www.onsemi.com