|
AMIS-42673 Datasheet, PDF (7/11 Pages) AMI SEMICONDUCTOR – High Speed CAN Transceiver | |||
|
◁ |
AMISâ42673
Table 6. DC CHARACTERISTICS VCC = 4.75 V to 5.25 V, V33 = 2.9 V to 3.6 V; TJ = â40°C to +150°C; RLT = 60 W unless specified
otherwise.
Symbol
Parameter
Conditions
Min
Typ
Max Unit
BUS LINES (Pins CANH and CANL)
Vihcm(dif)(th)
Vi(dif)(hys)
Differential Receiver Threshold Voltage for
High CommonâMode
Differential Receiver Input Voltage Hysteresis
Ri(cm)(CANH)
CommonâMode Input Resistance at Pin
CANH
Ri(cm) (CANL)
CommonâMode Input Resistance at Pin
CANL
Ri(cm)(m)
Matching Between Pin CANH and Pin CANL
CommonâMode Input Resistance
Ri(dif)
Differential Input Resistance
BUS LINES (Pins CANH and CANL)
Ci(CANH)
Ci(CANL)
Ci(dif)
ILI(CANH)
ILI(CANL)
VCMâpeak
Input Capacitance at Pin CANH
Input Capacitance at Pin CANL
Differential Input Capacitance
Input Leakage Current at Pin CANH
Input Leakage Current at Pin CANL
CommonâMode Peak During Transition from
Dom â Rec or Rec â Dom
VCMâstep
Difference in CommonâMode Between
Dominant and Recessive State
â35 V < VCANL < +35 V;
â35 V < VCANH < +35 V;
See Figure 4
â35 V < VCANL < +35 V;
â35 V < VCANH < +35 V;
See Figure 4
VCANH = VCANL
VTxD = VCC; Not Tested
VTxD = VCC; Not Tested
VTxD = VCC; Not Tested
VCC = 0 V; VCANH = 5 V
VCC = 0 V; VCANL = 5 V
Figures 7 and 8
Figures 7 and 8
0.25
0.7
1.05
V
50
70
100 mV
15
25
37
kW
15
25
37
kW
â3
0
+3
%
25
50
75
kW
7.5
20
pF
7.5
20
pF
3.75
10
pF
10
170
250
mA
10
170
250
mA
â500
500 mV
â150
150 mV
POWERâONâRESET
PORL
POR Level
CANH, CANL, Vref in
TriâState Below POR
Level
2.2
3.5
4.7
V
THERMAL SHUTDOWN
TJ(sd)
Shutdown Junction Temperature
TIMING CHARACTERISTICS (See Figures 6 and 7)
td(TxDâBUSon)
td(TxDâBUSoff)
td(BUSonâRxD)
td(BUSoffâRxD)
tpd(recâdom)
Delay TxD to Bus Active
Delay TxD to Bus Inactive
Delay Bus Active to RxD
Delay Bus Inactive to RxD
Propagation Delay TxD to RxD from
Recessive to Dominant
td(domârec)
Propagation Delay TxD to RxD from
Dominant to Recessive
150
160
180
°C
40
85
110
ns
30
60
110
ns
25
55
110
ns
65
100
135
ns
100
230
ns
100
245
ns
7. Not tested at ATE
Table 7. DIGITAL OUTPUT CHARACTERISTICS @ V33 = 2.5 V VCC = 4.75 to 5.25 V; V33 = 2.5 V $5%; TJ = â40 to +150°C;
RLT = 60 W unless specified otherwise.
Symbol
Parameter
Conditions
Min
Typ
Max Unit
RECEIVER DATA OUTPUT (Pin RxD)
Ioh
HIGHâLevel Output Current
Iol
LOWâLevel Output Current
VOH > 0.9 x V33
VOL < 0.1 x V33
â2.6
mA
4
mA
http://onsemi.com
7
|
▷ |