MC100LVEP111 Datasheet, PDF (6/13 Pages) ON Semiconductor – Low-Voltage 1:10 Differential LVECL/LVPECL/LVEPECL/HSTL Clock Driver

MC100LVEP111
Table 7. NECL DC CHARACTERISTICS V_CC = 0 V, V_EE = −2.375 V to −3.8 V (Note 10)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
I_EE
V_OH
V_OL
V_IH
V_IL
V_BB
V_IHCMR
Power Supply Current
60
90 120 60
90 120 60
90 120 mA
Output HIGH Voltage (Note 11)
−1145 −1020 −895 −1145 −1020 −895 −1145 −1020 −895 mV
Output LOW Voltage (Note 11)
−1945 −1770 −1600 −1945 −1770 −1600 −1945 −1770 −1600 mV
Input HIGH Voltage (Single−Ended) −1165
−880 −1165
−880 −1165
−880 mV
Input LOW Voltage (Single−Ended) −1945
−1625 −1945
−1625 −1945
−1625 mV
Output Reference Voltage (Note 12) −1525 −1425 −1325 −1525 −1425 −1325 −1525 −1425 −1325 mV
Input HIGH Voltage Common Mode
V_EE + 1.2
0.0
V_EE + 1.2
0.0
V_EE + 1.2
0.0
V
Range (Differential Configuration)
(Note 13)
I_IH
Input HIGH Current
I_IL
Input LOW Current
CLK 0.5
CLK −150
150
0.5
−150
150
0.5
−150
150 mA
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
10. Input and output parameters vary 1:1 with V_CC.
11. All loading with 50 W to V_CC − 2.0 V.
12. Single ended input operation is limited V_EE ≤ −3.0V in NECL mode.
13. V_IHCMR min varies 1:1 with V_EE, V_IHCMR max varies 1:1 with V_CC. The V_IHCMR range is referenced to the most positive side of the differential
input signal.
Table 8. HSTL DC CHARACTERISTICS V_CC = 2.375 to 3.8 V, V_EE = 0 V
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
V_IH
Input HIGH Voltage
V_IL
Input LOW Voltage
Vx
Input Crossover Voltage
1200
680
1200
400
900 680
1200
400
900 680
mV
400 mV
900 mV
I_CC
Power Supply Current
70 100 120 70 100 120 70 100 120 mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
http://onsemi.com
6