EFC6611R Datasheet, PDF (6/6 Pages) ON Semiconductor – N-Channel Power MOSFET

Package Dimensions
unit : mm
EFC6611R-TF
CSP6, 1.77x3.54 / EFCP3517-6DGH-20
CASE 568AL
ISSUE O
E
PIN A1
REFERENCE
2X
0.05 C
2X
0.05 C
0.03 C
0.03 C
TOP VIEW
SIDE VIEW
2X b
0.05 C A B
0.03 C
e2
e2
1
2
3
4X b1
1: Source1
2: Gate1
3: Source1
4: Source2
5: Gate2
6: Source2
6
5
4
L
BOTTOM VIEW
EFC6611R
AB
D
A
C
SEATING
PLANE
e/2
e
8X
R0.125
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
MILLIMETERS
DIM MIN MAX
A
−−− 0.22
b 0.22 0.28
b1 0.22 0.28
D
1.77 BSC
E
3.54 BSC
e
0.50 BSC
e2
1.00 BSC
L 1.22 1.28
RECOMMENDED
SOLDERING FOOTPRINT*
2X
0.25
4X
1.25
PACKAGE
OUTLINE
0.50
PITCH
1
2.00
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
Note on usage : Since the EFC6611R is a MOSFET product, please avoid using this device in the vicinity
of highly charged objects.
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.A2291-6/6