CM2020-01TR Datasheet, PDF (6/12 Pages) ON Semiconductor – HDMI Transmitter Port Protection and Interface Device

CM2020-01TR
ELECTRICAL OPERATING CHARACTERISTICS ⁽¹⁾
SYMBOL PARAMETER
CONDITIONS
MIN TYP MAX UNITS
I_CC5V
Operating Supply Current
5V_SUPPLY = 5.0V
110 130
µA
I_CCLV
Bias Supply Current
LV_SUPPLY = 3.3V
1
5
µA
V_DROP
5V_OUT Overcurrent Output 5V_SUPPLY= 5.0V,
Drop
I_OUT=55mA
65 100
mV
I_SC
5V_OUT Short Circuit Current 5V_SUPPLY= 5.0V,
Limit
5V_OUT = GND
90 135 175
mA
I_OFF
OFF state leakage current, LV_SUPPLY=0V
level shifting NFET
0.1
5
µA
I_BACKDRIVE
Current conducted from
output pins to V_SUPPLY
rails when powered down
5V_SUPPLY < V ; _{CH_OUT}
Signal pins: TMDS_D[2:0]+/–,
TMDS_CK+/–, CE_REMOTE_OUT,
DDC_DAT_OUT, DDC_CLK_OUT,
HOTPLUG_DET_OUT, 5V_OUT
Only
0.1
5
µA
I CEC _BACKDRIVE,
Current through
CE-REMOTE_OUT when
powered down
CE-REMOTE_IN = CE_SUPPLY <
CE_REMOTE_OUT
0.1
1
µA
V_ON
VOLTAGE drop across level LV_SUPPLY = 2.5V, V_S = GND,
shifting NFET when ON
I_DS = 3mA
75
95 140
mV
V_F
Diode Forward Voltage
Top Diode
Bottom Diode
I_F = 8mA, T_A = 25°C
0.6 0.85 0.95
V
0.6 0.85 0.95
V
V_ESD
ESD Withstand Voltage:
Pins 4, 7, 10, 13, 20, 21, 22, 23, 24, _±8
kV
Contact discharge per
27, 30, 33, 38;
IEC 61000- Note 2
4-2 Standard
V_CL
Channel Clamp Voltage
Positive Transients
T_A = 25°C, I_PP = 1A, t_P = 8/20µs;
Note 3
Negative Transients
11.0
V
–2.0
V
R_DYN
Dynamic Resistance
Positive Transients
Negative Transients
T_A = 25°C, I_PP = 1A, t_P = 8/20µs;
Notes 3
1.2
Ω
0.9
Ω
I_LEAK
TMDS Channel Leakage
T_A = 25°C
Current
0.01
1
µA
C_IN, TMDS
TMDS Channel Input
Capacitance
5V_SUPPLY= 5.0V,
Measured at 1MHz,
V_BIAS=2.5V
0.9 1.2
pF
Rev. 4 | Page 6 of 12 | www.onsemi.com