AR023Z Datasheet, PDF (6/35 Pages) ON Semiconductor – Mp/Full HD Digital Image Sensor

AR023Z: 1/2.7-Inch 2.1 Mp/Full HD Digital Image Sensor
General Description
General Description
The ON Semiconductor AR023Z can be operated in its default mode or programmed for
frame size, exposure, gain, and other parameters. The default mode output is a 1080p-
resolution image at 60 frames per second (fps) through the HiSPi port. In linear mode, it
outputs 12-bit or 10-bit A-Law compressed raw data, using either the parallel or serial
(HiSPi) output ports. In high dynamic range mode, it outputs 12-bit compressed data
using parallel output. In HiSPi mode, 12- or 14-bit compressed, or 16-bit linearized data
may be output. The device may be operated in video (master) mode or in single frame
trigger mode.
FRAME_VALID and LINE_VALID signals are output on dedicated pins, along with a
synchronized pixel clock in parallel mode.
The AR023Z includes additional features to allow application-specific tuning:
windowing and offset, auto black level correction, and on-board temperature sensor.
Optional register information and histogram statistic information can be embedded in
the first and last 2 lines of the image frame.
The AR023Z is designed to operate over a wide temperature range of -30°C to +85°C
ambient.
AR023Z/D Rev. 0, Pub. 9/15 EN
6
©Semiconductor Components Industries, LLC, 2015.