|
MC74LCX08_14 Datasheet, PDF (4/7 Pages) ON Semiconductor – Low-Voltage CMOS Quad 2-Input AND Gate | |||
|
◁ |
MC74LCX08
AC CHARACTERISTICS (tR = tF = 2.5 ns; RL = 500 W)
Limits
Symbol
Parameter
Waveform
VCC = 3.3 V ± 0.3 V
CL = 50 pF
Min
Max
TA = â40°C to +85°C
VCC = 2.7 V
CL = 50 pF
Min
Max
VCC = 2.5 V ± 0.2 V
CL = 30 pF
Min
Max
Unit
tPLH
Propagation Delay Time
1
1.5
5.5
1.5
6.2
1.5
6.6
ns
tPHL
Input to Output
1.5
5.5
1.5
6.2
1.5
6.6
tOSHL
OutputâtoâOutput Skew
1.0
ns
tOSLH
(Note 3)
1.0
3. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device.
The specification applies to any outputs switching in the same direction, either HIGHâtoâLOW (tOSHL) or LOWâtoâHIGH (tOSLH); parameter
guaranteed by design.
DYNAMIC SWITCHING CHARACTERISTICS
Symbol
Characteristic
Condition
TA = +25°C
Min
Typ
Max Unit
VOLP
Dynamic LOW Peak Voltage
VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V
0.8
V
(Note 4)
VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V
0.6
V
VOLV
Dynamic LOW Valley Voltage
VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V
â0.8
V
(Note 4)
VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V
â0.6
V
4. Number of outputs defined as ânâ. Measured with ânâ1â outputs switching from HIGHâtoâLOW or LOWâtoâHIGH. The remaining output is
measured in the LOW state.
CAPACITIVE CHARACTERISTICS
Symbol
Parameter
CIN
COUT
Input Capacitance
Output Capacitance
CPD
Power Dissipation Capacitance
Condition
VCC = 3.3 V, VI = 0 V or VCC
VCC = 3.3 V, VI = 0 V or VCC
10 MHz, VCC = 3.3 V, VI = 0 V or VCC
Typical
Unit
7
pF
8
pF
25
pF
ORDERING INFORMATION
Device
Package
Shippingâ
MC74LCX08DG
SOICâ14
(PbâFree)
55 Units / Rail
MC74LCX08DR2G
SOICâ14
(PbâFree)
2500 Tape & Reel
MC74LCX08DTG
TSSOPâ14
(PbâFree)
96 Units / Rail
MC74LCX08DTR2G
TSSOPâ14
(PbâFree)
2500 Tape & Reel
NLVLCX08DTR2G*
TSSOPâ14
(PbâFree)
2500 Tape & Reel
â For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECâQ101 Qualified and PPAP
Capable.
http://onsemi.com
4
|
▷ |