MC10EPT20_16 Datasheet, PDF (4/10 Pages) ON Semiconductor – LVTTL/LVCMOS to Differential LVPECL Translator

MC10EPT20, MC100EPT20
Table 4. LVTTL INPUT DC CHARACTERISTICS (V_CC = 3.3 V, GND = 0 V, T_A = −40°C to +85°C)
Symbol
Characteristic
Min
Typ
Max
Unit
I_IH
Input HIGH Current (V_in = 2.7 V)
I_IHH
Input HIGH Current MAX (V_in = 6.0 V)
I_IL
Input LOW Current (V_in = 0.5 V)
V_IK
Input Clamp Voltage (I_in = −18 mA)
V_IH
Input HIGH Voltage
V_IL
Input LOW Voltage
20
mA
100
mA
−0.6
mA
−1.2
V
2.0
V
0.8
V
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
Table 5. 10EPT PECL OUTPUT DC CHARACTERISTICS (V_CC = 3.3 V, GND = 0 V (Note 1))
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
I_CC
Positive Power Supply Current
V_OH Output HIGH Voltage (Note 2)
V_OL
Output LOW Voltage (Note 2)
18
23
28
18
23
28
19
24
29
mA
2165 2290 2415 2230 2355 2480 2290 2415 2540 mV
1365 1490 1615 1430 1555 1680 1490 1615 1740 mV
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
1. Output parameters vary 1:1 with V_CC.
2. All loading with 50 W to V_CC − 2.0 V.
www.onsemi.com
4