CS4192_05 Datasheet, PDF (4/8 Pages) ON Semiconductor – Single Air−Core Gauge Driver

PIN FUNCTION DESCRIPTION
PACKAGE PIN #
16 Lead SOIC Wide
PIN SYMBOL
1
SIN−
2
SIN+
3
4, 5, 12, 13
V_BB
GND
6
SI
7
V_CC
8
OE
9
SCLK
10
CS
11
ST
14
SO
15
COS−
16
COS+
CS4192
FUNCTION
Negative output for SINE coil.
Positive output SINE coil.
Analog supply. Nominally 13.5 V.
Ground.
Serial data input. Data present at the rising edge of the clock signal is shifted into
the internal shift register.
5.0 V logic supply. The internal registers and latches are reset by a POR generated
by the rising edge of the voltage on this pin.
Controls the state of the output buffers. A logic low on this pin turns them off.
Serial clock for shifting in/out of data. Rising edge shifts data on SI into the shift
register and the falling edge changes the data on SO.
When high allows data at SI to be shifted into part with the rising edges of SCLK.
The falling edge transfers the shift register contents into the DAC and multiplexer
to update the output buffers. The falling edge also reenables the output drivers if
they have been disabled by a fault.
STATUS reflects the state of the outputs and is low anytime the outputs are disabled,
either by OE or the internal protection circuitry. Requires external pullup resistor.
Serial data output. Existing 10−bit data is shifted out when new data is shifted in.
Allows cascading of multiple devices on common serial port.
Negative output for COSINE coil.
Positive output for COSINE coil.
ORDERING INFORMATION
Device
CS4192XDWF16
Package
SOIC−16 WB
Shipping^†
47 Units / Rail
CS4192XDWF16G
SOIC−16 WB
(Pb−Free)
47 Units / Rail
CS4192XDWFR16
SOIC−16 WB
1000 Units / Reel
CS4192XDWFR16G
SOIC−16 WB
(Pb−Free)
1000 Units / Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
4