 English |
|
|
|
|
|
|
|
| CM1214A Datasheet, PDF (4/14 Pages) California Micro Devices Corp – 1 and 2 Channel PicoGuardTM AC Signal ESD Protector | |||
| |||
| ◁ |
CM1214A
STANDARD OPERATING CONDITIONS
PARAMETER
Operating Temperature Range
RATING
â40 to +85
UNITS
°C
ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1)
SYMBOL PARAMETER
CONDITIONS
VST
Standoff Voltage
I=10µA
VESD ESD Voltage Protection
Notes 2 and 3
Peak discharge voltage between
CH pins
a) Contact discharge per
IEC 61000-4-2 standard
ILEAK
Channel Leakage Current
RDYN Dynamic Resistance
TA=25°C, 5.5V between CH pins
TA=25°C, IPP = 1A, tP = 8/20µS; Any
I/O pin to Ground; Note 4
VCL
Channel Clamp Voltage
TA=25°C, IPP = 1A, tP = 8/20µS;
Note 4
CIN
Channel Input Capacitance
Measured at 1MHz between CH
Voltage between CH pins = 0V pins
Voltage between CH pins = 5V
MIN TYP MAX UNITS
±7
V
±8
kV
±0.1 ±1.0 µA
1.36
â¦
11.3
V
0.4
0.6
0.9
pF
0.35 0.54 0.8
pF
Note 1: All parameters specified at TA = â40°C to +85°C unless otherwise noted.
Note 2:. Standard IEC 61000-4-2 with CDischarge = 150pF, RDischarge = 330â¦,.
Note 3:. From CH pin with other CH pin grounded.
Note 4: No-connect pins are left open for all tests.
Rev. 2 | Page 4 of 14 | www.onsemi.com
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese