|
CM1214A Datasheet, PDF (1/14 Pages) California Micro Devices Corp – 1 and 2 Channel PicoGuardTM AC Signal ESD Protector | |||
|
1- and 2-Channel PicoGuard®
AC Signal ESD Protector
CM1214A
Features
⢠Single channel ESD protection for an AC signal
up to ±5V for 0.25W transmit power
⢠Connects two channels in series for signals up to
±10V (1W transmit power)
⢠±8kV ESD protection per IEC 61000-4-2 contact
discharge
⢠Sub-1pF loading capacitance
⢠Minimal variation with voltage and temperature
⢠Each I/O pin can withstand over 1000 ESD
strikes*
⢠SOT23-3 and MSOP-8 packages
⢠RoHS-compliant, lead-free finishing
Applications
⢠RF switch and amplifier protection
⢠RF modules and RF IC protection
⢠Wireless handsets and WLAN
⢠High-speed AC signals for Gbit ethernet, etc.
Product Description
The CM1214A PicoGuard® ESD protector is used to
protect bipolar signal lines against electrostatic
discharge (ESD). The CM1214A allows operation in
high-speed environments with signals levels up to
±5V.
The CM1214A comes in two versions:
⢠The CM1214A-01SO is a single channel ESD
protector and is available in a 3-lead SOT23-3
package.
⢠The CM1214A-02MR is a dual channel ESD
protector and is available in an 8-lead MSOP-8
package.
The low sub-1pF loading capacitance makes the
CM1214A-01SO ideal for protecting high-speed
interfaces including RF switches and amplifiers.
The CM1214A-02MR is ideal for dual high-speed
signal pairs used in Gigabit Ethernet, ADSL, etc. The
CM1214A-02MR can also be used for higher transmit
voltage applications by connecting the two channels
in series.
Both devices come in RoHS-compliant, lead-free
finishing.
Block Diagram
©2010 SCILLC. All rights reserved.
April 2010 â Rev.2
Publication Order Number:
CM1214A/D
|
▷ |