NCP1651D Datasheet, PDF (3/32 Pages) ON Semiconductor – Single Stage Power Factor Controller

NCP1651
MAXIMUM RATINGS (Maximum ratings are those that, if exceeded, may cause damage to the device. Electrical Characteristics are
not guaranteed over this range.)
Rating
Symbol
Value
Unit
Power Supply Voltage (Operating)
Output (Pin 1)
V_CC
--0.3 to 18
V
Current Sense Amplifier Input (Pin 5)
FB/SD Input (Pin 8)
C_T Input (Pin 3)
Line Voltage
All Other Pins
Thermal Resistance, Junction--to--Air
0.1 in² Copper
0.5 in² Copper
V(I_S+)
V_FB/SD
V_CT
V_startup
θ_JA
--0.3 to 1.0
--0.3 to 11
--0.3 to 4.5
--0.3 to 500
--0.3 to 6.5
130
110
V
V
V
V
V
C/W
Thermal Resistance, Junction--to--Lead
θ_JL
50
C/W
Maximum Power Dissipation @ T_A = 25C
Pmax
0.77
W
Operating Temperature Range
T_j
--40 to 125
C
Non--operating Temperature Range
T_j
--55 to 150
C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
A. This device series contains ESD protection and exceeds the following tests:
Pins 1--6: Human Body Model 2000 V per MIL--STD--883, Method 3015.
Pins 1--6: Machine Model Method 200 V.
Pin 8 is the HV startup to the device and is rated to the maximum rating of the part, or 500 V.
http://onsemi.com
3