|
JLC1562BE Datasheet, PDF (3/9 Pages) ON Semiconductor – I2C Bus I/O Expander | |||
|
◁ |
JLC1562B
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ MAXIMUM RATINGS (Referenced to GND)
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Symbol
Parameter
Value
Unit
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vdd
DC Supply Voltage
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vin
DC Input Voltage
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vout
DC Output Voltage
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ I
DC Input/Output Current (per Pin)
â0.5 to +7.0
V
â0.5 to Vdd +0.5
V
â0.5 to Vdd +0.5
V
25
mA
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ IDD
DC Supply Current (VDD and GND Pins)
75
mA
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Tstg
Storage Temperature Range
â65 to +150
°C
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TL
Lead Temperature, 1 mm from Case for 10 Seconds
300
°C
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
RECOMMENDED OPERATING CONDITIONS
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Symbol
Parameter
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vdd
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vin, Vout
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TA
DC Supply Voltage
DC Input Voltage
Operating Temperature
Min
Max
Unit
4.2
6.0
V
0.0
Vdd
V
â40
+85
°C
DC CHARACTERISTICS (Referenced to Vss)
Guaranteed Limit
Symbol
Parameter
Min
Max
Unit
VIH
Maximum Input Voltage, âHâ
0.7 Vdd
â
V
VIL
Maximum Input Voltage, âLâ
â
0.3 Vdd
V
VOL
Maximum Output Voltage, âLâ (Iout = 4mA)
â
0.3
V
Iin
Maximum Input Leakage Current (Vin = Vdd or Vss, SCL pin only)
â
± 1.0
mA
Ioz
Maximum Output HiâZ Leakage Current (Output = High Impedance; Vout = Vdd)
â
± 5.0
mA
Cin
Maximum Input Capacitance (Input Pin)
â
10
pF
Cout
Maximum Output Capacitance (Output Pin)
â
15
pF
Ci/o
Maximum I/O Capacitance (I/O Pin)
â
15
pF
VICR
Comparator Common Mode Input Voltage Range
0
Vdd â1.5
V
ICC
Maximum Quiescent Supply Current (per Package)
â
5.0
mA
COMPARATOR AC CHARACTERISTICS
Symbol
tPD
Parameter
Maximum Propagation Delay
Guaranteed Limit
Test Conditions
Min
Typ
Max
Unit
Vref = 1.5 V, 10mV overdrive
â
1.0
â
mS
Vref = 1.5 V, 100mV overdrive
â
0.2
â
mS
http://onsemi.com
3
|
▷ |