AMIS-30600 Datasheet, PDF (3/11 Pages) AMI SEMICONDUCTOR – LIN Transceiver

AMIS−30600
Table 1. PIN LIST AND DESCRIPTIONS
Pin Name
Description
1 RxD Receive data output; low in dominant state
2
EN Enable input; transceiver in normal operation mode when high
3 VCC 5V supply input
4 TxD Transmit data input; low in dominant state; internal 40 kW pullup
5 GND Ground
6
LIN LIN bus output/input; low in dominant state; internal 30 kW pullup
7 VBB Battery supply input
8
INH Inhibit output; to control a voltage regulator; becomes high when wake−up via LIN bus occurs
Table 2. ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
Conditions
Min
Max
Unit
V_CC
Supply Voltage
−0.3
+7
V
V_BB
Battery Supply Voltage
−0.3
+40
V
V_LIN
DC Voltage at Pin LIN
0 < V_CC < 5.50 V
−40
+40
V
V_INH
DC Voltage at Pin INH
0 < V_CC < 5.50 V
−0.3
V_BB + 0.3
V
V_TxD
DC Voltage at Pin TxD
0 < V_CC < 5.50 V
−0.3
V_CC + 0.3
V
V_RxD
DC Voltage at Pin RxD
0 < V_CC < 5.50 V
−0.3
V_CC + 0.3
V
V_EN
DC Voltage at Pin EN
0 < V_CC < 5.50 V
−0.3
V_CC + 0.3
V
V_esd(LIN)
Electrostatic Discharge Voltage at LIN Pin
(Note 1)
−4
+4
kV
V_esd
Electrostatic Discharge Voltage at All Other Pins
(Note 1)
−4
+4
kV
V_tran(LIN)
Transient Voltage at Pin LIN
(Note 2)
−150
+150
V
V_tran(VBB) Transient Voltage at Pin V_BB
(Note 3)
−150
+150
V
T_amb
Ambient Temperature
−40
+150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Standardized Human Body Model system ESD pulses in accordance to IEC 1000.4.2.
2. Applied transient waveforms in accordance with “ISO 7637 parts 1 & 3”, capacitive coupled test pulses 1 (−100 V), 2 (+100 V), 3a (−150 V),
and 3b (+150 V). See Figure 8.
3. Applied transient waveforms in accordance with “ISO 7637 parts 1 & 3”, direct coupled test pulses 1 (−100 V), 2 (+75 V), 3a (−150 V), 3b
(+150 V), and 5 (+80 V). See Figure 8.
Table 3. OPERATING RANGE
Symbol
Parameter
V_CC
V_BB
T_J
T_jsd
R_thj−a
Supply Voltage
Battery Supply Voltage
Maximum Junction Temperature
Thermal Shutdown Temperature
Thermal Resistance Junction−to−Ambient
Min
4.75
7.3
−40
+150
Typ
+170
185
Max
+5.25
+18
+150
+190
Unit
V
V
°C
°C
°C/W
http://onsemi.com
3