MC7800_10 Datasheet, PDF (23/33 Pages) ON Semiconductor – 1.0 A Positive Voltage Regulators

MC7800, MC7800A, MC7800AE, NCV7800
DEFINITIONS
Line Regulation − The change in output voltage for a
change in the input voltage. The measurement is made under
conditions of low dissipation or by using pulse techniques
such that the average chip temperature is not significantly
affected.
Load Regulation − The change in output voltage for a
change in load current at constant chip temperature.
Maximum Power Dissipation − The maximum total
device dissipation for which the regulator will operate
within specifications.
Quiescent Current − That part of the input current that is
not delivered to the load.
Output Noise Voltage − The rms ac voltage at the output,
with constant load and no input ripple, measured over a
specified frequency range.
Long Term Stability − Output voltage stability under
accelerated life test conditions with the maximum rated
voltage listed in the devices’ electrical characteristics and
maximum power dissipation.
ORDERING INFORMATION
Device
MC7805ABD2T
MC7805ABD2TG
Nominal Voltage
Operating
Temperature Range
Package
D²PAK
D²PAK
(Pb−free)
Shipping^†
50 Units /Rail
50 Units /Rail
MC7805ABD2TR4
MC7805ABD2TR4G
T_J = −40°C to +125°C
D²PAK
D²PAK
(Pb−free)
800 / Tape & Reel
800 / Tape & Reel
MC7805ABT
TO−220
50 Units /Rail
MC7805ABTG
TO−220
(Pb−free)
50 Units /Rail
MC7805ACD2T
MC7805ACD2TG
D²PAK
D²PAK
(Pb−free)
50 Units /Rail
50 Units /Rail
MC7805ACD2TR4
MC7805ACD2TR4G
MC7805ACT
5.0 V
T_J = 0°C to +125°C
D²PAK
D²PAK
(Pb−free)
TO−220
800 / Tape & Reel
800 / Tape & Reel
50 Units /Rail
MC7805ACTG
TO−220
(Pb−free)
50 Units /Rail
MC7805BD2T
MC7805BD2TG
D²PAK
D²PAK
(Pb−free)
50 Units /Rail
50 Units /Rail
MC7805BD2TR4
MC7805BD2TR4G
MC7805BDT
T_J = −40°C to +125°C
D²PAK
D²PAK
(Pb−free)
DPAK
800 / Tape & Reel
800 / Tape & Reel
75 Units / Rail
MC7805BDTG
DPAK
(Pb−free)
75 Units / Rail
MC7805BDTRK
DPAK
2500 / Tape & Reel
MC7805BDTRKG
DPAK
(Pb−free)
2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Spe-
cifications Brochure, BRD8011/D.
*NCV devices: T_low = −40°C, T_high = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and
change control.
http://onsemi.com
23