|
LC87F7NJ2A Datasheet, PDF (23/28 Pages) ON Semiconductor – 8-bit Microcontroller | |||
|
◁ |
LC87F7NJ2A
Continued from preceding page.
Parameter
Symbol
Pin/
Remarks
Conditions
VDD [V]
min
Specification
typ
max
unit
HALT mode
consumption
current
(Note 7-1)
IDDHALT(1)
VDD1
=VDD2
=VDD3
⢠HALT mode
⢠FmCF=18MHz ceramic oscillation mode
⢠FmXâtal=32.768kHz crystal oscillation mode
⢠System clock set to 12MHz side
2.7 to 3.6
2.7
6.8
⢠Internal RC oscillation stopped.
⢠Frequency variable RC oscillation stopped.
⢠1/1 frequency division ratio
IDDHALT(2)
⢠HALT mode
⢠FmCF=8MHz ceramic oscillation mode
⢠FmXâtal=32.768kHz crystal oscillation mode
⢠System clock set to 12MHz side
2.5 to 3.6
1.4
3.1
⢠Internal RC oscillation stopped.
⢠Frequency variable RC oscillation stopped.
⢠1/1 frequency division ratio
IDDHALT(3)
⢠HALT mode
⢠FmCF=0Hz (oscillation stopped)
⢠FmXâtal=32.768kHz crystal oscillation mode
⢠System clock set to internal RC oscillation
2.5 to 3.6
0.2
0.75
mA
⢠Frequency variable RC oscillation stopped.
⢠1/2 frequency division ratio
IDDHALT(4)
⢠HALT mode
⢠FmCF=0Hz (oscillation stopped)
⢠FmXâtal=32.768kHz crystal oscillation mode
⢠Internal RC oscillation stopped.
2.5 to 3.6
1.6
4.6
⢠System clock set to 10MHz with
frequency variable RC oscillation
⢠1/1 frequency division ratio
IDDHALT(5)
⢠HALT mode
⢠FmCF=0Hz (oscillation stopped)
⢠FmXâtal=32.768kHz crystal oscillation mode
⢠Internal RC oscillation stopped.
2.5 to 3.6
0.7
1.75
⢠System clock set to 4MHz with
frequency variable RC oscillation
⢠1/1 frequency division ratio
IDDHALT(6)
⢠HALT mode
⢠FmCF=0Hz (oscillation stopped)
⢠FmXâtal=32.768kHz crystal oscillation mode
⢠System clock set to 32.768kHz side
2.5 to 3.6
12.4
54.9
⢠Internal RC oscillation stopped.
⢠Frequency variable RC oscillation stopped.
HOLD mode
consumption
current
IDDHOLD(1) VDD1
⢠1/2 frequency division ratio
⢠HOLD mode
⢠CF1=VDD or open (External clock mode)
2.5 to 3.6
ïA
0.08
18.4
Timer HOLD
IDDHOLD(2)
⢠Timer HOLD mode
mode
consumption
⢠CF1=VDD or open (External clock mode)
⢠FmXâtal=32.768kHz crystal oscillation mode
2.5 to 3.6
10.14 34.4
current
Note 7-1: The consumption current value includes none of the currents that flow into the output Tr and internal pull-up
resistors.
www.onsemi.com
23
|
▷ |