LC87F1A32A Datasheet, PDF (20/26 Pages) Sanyo Semicon Device – CMOS IC FROM 32K byte, RAM 2048K byte on-chip 8-bit 1-chip Microcontroller with Full-Speed USB

LC87F1A32A
Consumption Current Characteristics at Ta = 30°C to +70°C, VSS1 = VSS2 = VSS3 = 0V
Parameter
Symbol
Pin/
Remarks
Conditions
VDD[V]
Specification
min
typ
max
unit
Normal mode
consumption
current
(Note 7-1)
IDDOP(1)
IDDOP(2)
VDD1
=VDD2
=VDD3
• FmCF=12MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 12MHz side
• Internal PLL oscillation stopped
• Internal RC oscillation stopped
• USB circuit stopped
4.4 to 5.5
3.0 to 3.6
9.8
24
5.6
14
• 1/1 frequency division ration
IDDOP(3)
• FmCF=12MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 12MHz side
4.4 to 5.5
14
34
IDDOP(4)
• Internal PLL oscillation mode
• Internal RC oscillation stopped
• USB circuit operation mode
3.0 to 3.6
mA
7.7
19
• 1/1 frequency division ration
IDDOP(5)
IDDOP(6)
• FmCF=12MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 6MHz side
4.4 to 5.5
3.0 to 3.6
6.1
14
3.7
8.5
IDDOP(7)
• Internal RC oscillation stopped
• 1/2 frequency division ration
2.7 to 3.0
3.0
6.7
IDDOP(8)
IDDOP(9)
IDDOP(10)
• FmCF=0MHz (oscillation stopped)
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to internal RC oscillation
• 1/2 frequency division ration
4.4 to 5.5
3.0 to 3.6
2.7 to 3.0
0.63
3.0
0.35
1.6
0.30
1.3
IDDOP(11)
IDDOP(12)
• FmCF=0MHz (oscillation stopped)
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 32.768kHz side
4.4 to 5.5
3.0 to 3.6
39
150
17
58 A
IDDOP(13)
• Internal RC oscillation stopped
• 1/2 frequency division ration
2.7 to 3.0
14
43
HALT mode
consumption
current
(Note 7-1)
IDDHALT(1)
VDD1
=VDD2
=VDD3
• HALT mode
• FmCF=12MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 12MHz side
4.4 to 5.5
4.9
12
IDDHALT(2)
• Internal PLL oscillation stopped
• Internal RC oscillation stopped
• USB circuit stopped
3.0 to 3.6
2.6
6.3
• 1/1 frequency division ration
IDDHALT(3)
IDDHALT(4)
• HALT mode
• FmCF=12MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 12MHz side
• Internal PLL oscillation mode
• Internal RC oscillation stopped
• USB circuit operation mode
• 1/1 frequency division ration
4.4 to 5.5
3.0 to 3.6
8.9
23
mA
4.6
12
IDDHALT(5)
IDDHALT(6)
IDDHALT(7)
• HALT mode
• FmCF=12MHz ceramic oscillation mode
• FsX’tal=32.768kHz crystal oscillation mode
• System clock set to 6MHz side
• Internal RC oscillation stopped
• 1/2 frequency division ration
4.4 to 5.5
3.0 to 3.6
2.7 to 3.0
3.0
7.2
1.6
3.8
1.3
2.9
Note 7-1: The consumption current value includes none of the currents that flow into the output Tr and internal pull-up
resistors.
Continued on next page.
No.A0704-20/26