NRVBB4030T4G Datasheet, PDF (2/6 Pages) ON Semiconductor – SWITCHMODE Power Rectifier

MBRB4030G, NRVBB4030T4G
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(At Rated V_R) T_C = +115C (Note 1)
Peak Repetitive Forward Current
(At Rated V_R, Square Wave, 20 kHz), T_C = +112C
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
V_RRM
30
V
V_RWM
V_R
I_F(AV)
A
40
I_FRM
A
80
I_FSM
A
300
Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz)
I_RRM
2.0
A
Storage Temperature Range
Operating Junction Temperature Range (Note 2)
T_stg
−65 to +175
C
T_J
−65 to +175
C
Voltage Rate of Change (Rated V_R)
dv/dt
10,000
V/ms
Reverse Energy (Unclamped Inductive Surge), (T_C = 25C, L = 3.0 mH)
W
600
mJ
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Rating applies when pins 1 and 3 are connected.
2. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dP_D/dT_J < 1/R_qJA.
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, Junction−to−Case
Thermal Resistance, Junction−to−Ambient (Note 3)
3. Rating applies when surface mounted on the miniumum pad size recommended.
Symbol
R_qJC
R_qJA
Value
1.0
50
Unit
C/W
C/W
ELECTRICAL CHARACTERISTICS
Characteristic
Maximum Instantaneous Forward Voltage (Notes 4 and 5), per Device
(I_F = 20 A, T_C = + 25C)
(I_F = 20 A, T_C = +150C)
(I_F = 40 A, T_C = + 25C)
(I_F = 40 A, T_C = +150C)
Maximum Instantaneous Reverse Current (Note 5), per Device
(Rated DC Voltage, T_C = + 25C)
(Rated DC Voltage, T_C = +125C)
4. Rating applies when pins 1 and 3 are connected.
5. Pulse Test: Pulse Width = 300 ms, Duty Cycle  2.0%
Symbol
Value
Unit
V_F
V
0.46
0.34
0.55
0.45
I_R
mA
0.35
150
ORDERING INFORMATION
Device
Package
Shipping^†
MBRB4030G
D²PAK
(Pb−Free)
50 Units / Rail
MBRB4030T4G
D²PAK
(Pb−Free)
800 Units / Tape & Reel
NRVBB4030T4G
D²PAK
(Pb−Free)
800 Units / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
2