NP-SAMC Datasheet, PDF (2/7 Pages) ON Semiconductor – 50A, Ultra Low Capacitance TSPD

NP−SAMC Series
SURGE RATINGS
Waveform (ms)
Value
2x10
150
8x20
150
10x160
90
I_PPS
A
10x560
50
10x360
75
10x1000
50
5x310
75
I_TSM
A
0.1 s
60 Hz
20
di/dt
A/ms
500
MAXIMUM RATINGS (T_A = 25°C unless otherwise noted)
Symbol
Rating
Value
Unit
V_DRM
Repetitive peak off−state voltage: Rated maximum
(peak) continuous voltage that may be applied in the
off−state conditions including all dc and repetitive
alternating voltage components.
NP0640SAMCT3G
NP0720SAMCT3G
NP0900SAMCT3G
$58
V
$65
$75
NP1100SAMCT3G
$90
NP1300SAMCT3G
$120
NP1500SAMCT3G
$140
NP1800SAMCT3G
$170
NP2100SAMCT3G
$180
NP2300SAMCT3G
$190
NP2600SAMCT3G
$220
NP3100SAMCT3G
$275
NP3500SAMCT3G
$320
I_PPS
Nonrepetitive peak pulse current: Rated maximum 2x10 ms, GR−1089−CORE
value of peak impulse pulse current that may be
applied.
8x20 ms, IEC−61000−4−5
10x160 ms, TIA−968−A
150
A
150
90
10x560 ms, TIA−968−A
50
10x360 ms, GR−1089−CORE
75
10x1000 ms, GR−1089−CORE
50
5x310 ms, ITU−K.20/K.21/K.45
75
I_TSM
Nonrepetitive peak on−state current: Rated
maximum (peak) value of ac power frequency
on−state surge current which may be applied for a
specified time or number of ac cycles.
0.1s, 50/60 Hz, full sine wave
20
A
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
http://onsemi.com
2