MUR1620CTRG Datasheet, PDF (2/6 Pages) ON Semiconductor – Switch Mode Power Rectifier

MUR1620CTRG, MURB1620CTRG, NRVUB1620CTRT4G
MAXIMUM RATINGS (Per Leg)
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(Rated V_R, T_C = 160°C)
Per Leg
Per Total Device
V_RRM
200
V
V_RWM
V_R
I_F(AV)
A
8.0
16
Peak Repetitive Surge Current
(Rated V_R, Square Wave, 20 kHz, T_C = 140°C)
Per Diode
I_FM
A
16
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
I_FSM
100
A
Operating Junction and Storage Temperature Range
T_J, T_stg
−65 to +175
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS (Per Leg)
Characteristic
Thermal Resistance, Junction−to−Case
Thermal Resistance, Junction−to−Ambient (D²PAK)
Symbol
R_qJC
R_qJA
Value
2.0
45
Unit
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (Per Leg)
Characteristic
Symbol
Value
Unit
Maximum Instantaneous Forward Voltage (Note 1)
(i_F = 8.0 Amps, T_C = 25°C)
(i_F = 8.0 Amps, T_C = 150°C)
v_F
V
1.2
1.1
Maximum Instantaneous Reverse Current (Note 1)
(Rated dc Voltage, T_C = 25°C)
(Rated dc Voltage, T_C = 150°C)
i_R
mA
5.0
500
Maximum Reverse Recovery Time
(I_F = 1.0 Amp, di/dt = 50 Amps/ms)
t_rr
ns
85
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width = 5.0 ms, Duty Cycle ≤ 10%.
ORDERING INFORMATION
Device
Package
Shipping^†
MUR1620CTRG
TO−220
(Pb−Free)
50 Units / Rail
MURB1620CTRG
D²PAK−3
(Pb−Free)
50 Units / Rail
MURB1620CTRT4G
D²PAK−3
(Pb−Free)
800 / Tape & Reel
NRVUB1620CTRT4G
D²PAK−3
(Pb−Free)
800 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
2