3EZ6.2D5 Datasheet, PDF (2/5 Pages) ON Semiconductor – 3 Watt DO-41 Surmetic™ 30 Zener Voltage Regulators

3EZ6.2D5 Series
ELECTRICAL CHARACTERISTICS (T_A = 25°C unless
otherwise noted, V_F = 1.5 V Max @ I_F = 200 mA for all types)
Symbol
Parameter
V_Z
Reverse Zener Voltage @ I_ZT
I_ZT
Reverse Current
Z_ZT
Maximum Zener Impedance @ I_ZT
I_ZK
Reverse Current
Z_ZK
Maximum Zener Impedance @ I_ZK
I_R
Reverse Leakage Current @ V_R
V_R
Breakdown Voltage
I_F
Forward Current
V_F
Forward Voltage @ I_F
I_ZM
Maximum DC Zener Current
I_R
Surge Current @ T_A = 25°C
I
I_F
V_Z V_R
V
I_R
I_ZT
V_F
Zener Voltage Regulator
ELECTRICAL CHARACTERISTICS (T_A = 25°C unless otherwise noted, V_F = 1.5 V Max @ I_F = 200 mA for all types)
Device†
(Note 1)
Device
Marking
Zener Voltage (Note 2)
Zener Impedance (Note 3) Leakage Current
I_R
V_Z (Volts)
@ I_ZT Z_ZT @ I_ZT
Z_ZK @ I_ZK
I_R @ V_R
I_ZM (Note 4)
Min Nom Max mA
W
W
mA mA Max Volts mA
mA
3EZ6.2D5RLG 3EZ6.2D 5.89 6.2 6.51 121
1.5
700
1
5
3
435
3.1
3EZ13D5G
3EZ16D5RLG
3EZ13D 12.35 13 13.65 58
3EZ16D 15.2 16 16.8 47
4.5
700 0.25
0.5
9.9
208
1.54
5.5
700 0.25
0.5
12.2
169
1.25
3EZ18D5RLG 3EZ18D 17.1 18 18.9 42
6.0
750 0.25
0.5
13.7
150
1.11
1. TOLERANCE AND TYPE NUMBER DESIGNATION
Tolerance designation - device tolerance of ±5% are indicated by a “5” suffix.
2. ZENER VOLTAGE (V_Z) MEASUREMENT
ON Semiconductor guarantees the zener voltage when measured at 40 ms ±10 ms, 3/8″ from the diode body. And an ambient temperature
of 25°C (+8°C, -2°C)
3. ZENER IMPEDANCE (Z_Z) DERIVATION
The zener impedance is derived from 60 seconds AC voltage, which results when an AC current having an rms value equal to 10% of the
DC zener current (I_ZT or I_ZK) is superimposed on I_ZT or I_ZK.
4. SURGE CURRENT (I_R) NON-REPETITIVE
The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or
equivalent sine wave pulse of 1/120 second duration superimposed on the test current, I_ZT, per JEDEC standards. However, actual device
capability is as described in Figure 3 of the General Data sheet for Surmetic 30s.
†The “G'' suffix indicates these are Pb-Free packages.
5
L = LEAD LENGTH
L = 1/8″
TO HEAT SINK
4
L = 3/8″
3
2
L = 1″
1
0
0 20 40 60 80 100 120 140 160 180 200
T_L, LEAD TEMPERATURE (°C)
Figure 1. Power Temperature Derating Curve
http://onsemi.com
2