English
Language : 

LC78616PE Datasheet, PDF (14/26 Pages) ON Semiconductor – Compact Disc Player IC
LC78616PE
CD data output function
Two modes can be available for CD data output.
(1) Normal mode
In this mode, output signals are LRCK, BCK and DATA. CLV or Jitter-Free(VCEC) playback is supported.
When CDDA playback, depending on the specification of Audio DAC, FS384 clock output is also available .
(2) Slave mode
In ths mode, output signal is DATA, and input signals are LRCK, BCK. The DATA output is synchronized to
input clocks (LRCK,BCK).
It is enable to output CD data synchronized to Audio DAC without connecting FS384clock.
This mode is only available for CD normal playback, and LRCK frequency must be 44.1kHz.
1. Normal mode
 Available format
Mode
Slot Length
Data Length
: IIS, MSB First Right-Justified, MSB First Left-Justified
: 32fs, 48fs
: 16-bit
 Used Pin
LRCKO
BCKO
DATAO
: CONT00, CONT08
: CONT01, CONT09
: CONT02, CONT10
 Note
When CDDA Playback, FS384 can be optionally output from CONT04 or CONT05. The signal input from
XIN pin is output as FS384 signal.
 CD Data output timing
LRCKO
BCKO
DATAO
tABKO tABKO tBLP tBLA
tBDS tBDH
1/fABCK
Parameter
Bit clock Frequency
Bit clock "H" level width
Bit clock "L" level width
Setup time for LRCK
(based on BCK negedge)
Hold time for LRCK
(based on BCK negedge)
Setup time for DATA output
Hold time for DATA output
Symbol
Pin Names
Min Typ Max
unit
fABCKO
BCKO
10.5 MHz
tABKOH
BCKO
47.5
ns
tABKOL
BCKO
47.5
ns
tBLP
BCKO, LRCKO
0
15
ns
tBLA
BCKO, LRCKO
0
15
ns
tBDS
BCKO, DATAO
30
ns
tBDH
BCKO, DATAO
30
ns
* In case of quadruple speed playback, and setting the output format as 48fs slot length.
www.onsemi.com
14