CAT24M01_1110 Datasheet, PDF (14/14 Pages) ON Semiconductor – 1 Mb I2C CMOS Serial EEPROM

CAT24M01
Example of Ordering Information (Note 9)
Device Order
Number
Specific
Device
Marking
Package Type
Temperature
Range
Lead
Finish
Shipping (Note 10)
CAT24M01LE−G
24M01A
PDIP−8
−40°C to +125°C
NiPdAu
Rail
CAT24M01LI−G
24M01A
PDIP−8
−40°C to +85°C
NiPdAu
Rail
CAT24M01WE−GT3
24M01A
SOIC−8, JEDEC
−40°C to +125°C
NiPdAu
Tape & Reel, 3,000 Units / Reel
CAT24M01WI−GT3
24M01A
SOIC−8, JEDEC
−40°C to +85°C
NiPdAu
Tape & Reel, 3,000 Units / Reel
CAT24M01XE−T2
24M01A
SOIC−8, EIAJ
−40°C to +125°C
Matte−Tin
Tape & Reel, 2,000 Units / Reel
CAT24M01XI−T2
24M01A
SOIC−8, EIAJ
−40°C to +85°C
Matte−Tin Tape & Reel, 2,000 Units / Reel
CAT24M01YE−GT3
M01C
TSSOP−8
−40°C to +125°C
NiPdAu
Tape & Reel, 3,000 Units / Reel
CAT24M01YI−GT3
M01C
TSSOP−8
−40°C to +85°C
NiPdAu
Tape & Reel, 3,000 Units / Reel
CAT24M01HU5IGT3
MOL
UDFN8
−40°C to +85°C
NiPdAu
Tape & Reel, 3,000 Units / Reel
9. All packages are RoHS-compliant (Lead-free, Halogen-free).
10. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
ON Semiconductor is licensed by Philips Corporation to carry the I²C Bus Protocol.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: [phone]
Japan Customer Focus Center
Phone: 81−3−5773−3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
http://onsemi.com
14
CAT24M01/D