CM3212 Datasheet, PDF (11/11 Pages) ON Semiconductor – VTT Termination Voltage Regulator

CM3212
PACKAGE DIMENSIONS
WDFN8, 3x3, 0.65 P
CASE 511BH−01
ISSUE O
D
PIN ONE
ÇÇÇ ^REFERENCE
ÇÇÇÇÇÇ _2X
0.10 C
2X
0.10 C
0.10 C
TOP VIEW
DETAIL B
0.08 C
NOTE 4
DETAIL A
A1
SIDE VIEW
D2
1
4
AB
L
L
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
L1
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.30 MM FROM TERMINAL TIP.
DETAIL A
4. COPLANARITY APPLIES TO THE EXPOSED
E
ALTERNATE
PAD AS WELL AS THE TERMINALS.
CONSTRUCTIONS
MILLIMETERS
DIM MIN MAX
A3
ÇÇÉÇÇÉÇÇÉ ÉÉÇÉÉÇ ^EXPOSEDCu
MOLD CMPD
A
A1
A3
DETAIL B
ALTERNATE
CONSTRUCTIONS
A 0.70 0.80
A1 0.00 0.05
A3 0.20 REF
b 0.25 0.35
D
3.00 BSC
D2 2.20 2.40
E
3.00 BSC
E2 1.40 1.60
e
0.65 BSC
K
0.45 REF
L 0.20 0.40
L1 −−− 0.15
C
SEATING
PLANE
8X L
RECOMMENDED
SOLDERING FOOTPRINT*
PACKAGE
OUTLINE
2.46
8X
0.53
E2
8
5
e
BOTTOM VIEW
8X b
0.10
0.05
CAB
C NOTE 3
1.66
3.30
1
0.65
PITCH
8X
0.40
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: [phone]
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
11
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
CM3212/D