TCP-3012H Datasheet, PDF (1/9 Pages) ON Semiconductor – 1.2 pF Passive Tunable Integrated Circuits (PTIC)

TCP-3012H
Advance Information
1.2 pF Passive Tunable
Integrated Circuits (PTIC)
Introduction
ON Semiconductor’s PTICs have excellent RF performance and
power consumption, making them suitable for any mobile handset or
radio application. The fundamental building block of our PTIC
product line is a tunable material called ParaScant, based on Barium
Strontium Titanate (BST). PTICs have the ability to change their
capacitance from a supplied bias voltage generated by the Control IC.
The 1.2 pF PTICs are available as wafer-level chip scale packages
(WLCSP) and in QFN packages for easy mounting directly on printed
circuit boards.
Key Features
• High Tuning Range and Operation up to 20 V
• Usable Frequency Range: from 700 MHz to 2.7 GHz
• High Quality Factor (Q) for Low Loss
• High Power Handling Capability
• Compatible with PTIC Control IC TCC-103
• WLCSP Package: 0.722 x 0.879 x 0.611 mm (8 pillar)
• QFN Package: 1.200 x 1.600 x 0.950 mm
• QFN: MSL−2 Moisture Sensitivity Level (per J−STD−020)
• Pb−Free and RoHS Compliant
Typical Applications
• Multi-band, Multi-standard, Advanced and Simple Mobile Phones
• Tunable Antenna Matching Networks
• Tunable RF Filters
• Active Antennas
http://onsemi.com
WLCSP
8 pillar
CASE TBD
QFN
6 pin
CASE TBD
QFN MARKING DIAGRAM
X.XH
X.X = 1.2
H = High Tuning
FUNCTIONAL BLOCK DIAGRAM
PTIC
RF1
RF2
Bias
Figure 1. PTIC Functional Block Diagram
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
ORDERING INFORMATION
Device
Package
Shipping
TCP−3012H−DT WLCSP
(Pb−Free)
4000 Units /
7” Reel
TCP−3012H−QT
QFN
(Pb−Free)
8000 Units /
13“ Reel
For detailed ordering information, including part
number definition and capacitance (pF) see the
package dimensions section on page 7 of this
datasheet.
© Semiconductor Components Industries, LLC, 2013
1
May, 2013 − Rev. P2
Publication Order Number:
TCP−3012H/D