NSP4201MR6 Datasheet, PDF (1/6 Pages) ON Semiconductor – Transient Voltage Suppressors

NSP4201MR6
Transient Voltage
Suppressors
Low Clamping Voltage Surge Protection
Diode Array
The NSP4201MR6 transient voltage suppressor is designed to
protect high speed data lines from ESD, EFT, and lightning surges.
Features
• Protection for the Following IEC Standards:
IEC 61000−4−2 (ESD) ±30 kV (Contact)
IEC 61000−4−5 (Lightning) 25 A (8/20 ms)
• Low Clamping Voltage
• Low Leakage
• UL Flammability Rating of 94 V−0
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Applications
• High Speed Communication Line Protection
• USB 1.1 and 2.0 Power and Data Line Protection
• Digital Video Interface (DVI)
• Monitors and Flat Panel Displays
MAXIMUM RATINGS (T_J = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Peak Power Dissipation
8/20 ms @ T_A = 25°C (Note 1)
P_pk
500
W
Operating Junction Temperature Range
T_J
−40 to +125 °C
Storage Temperature Range
T_stg
−55 to +150 °C
Lead Solder Temperature −
Maximum (10 Seconds)
T_L
260
°C
IEC 61000−4−2 Air (ESD)
IEC 61000−4−2 Contact (ESD)
ESD
±30
kV
±30
IEC 61000−4−4 (5/50 ns)
EFT
40
A
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Non−repetitive current pulse per Figure 1 (Pin 5 to Pin 2)
See Application Note AND8308/D for further description of
survivability specs.
www.onsemi.com
6
1
TSOP−6
CASE 318G
MARKING DIAGRAM
42 MG
G
42 = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary
depending upon manufacturing location.
PIN CONFIGURATION AND SCHEMATIC
I/O 1
V_N 2
I/O 3
6 I/O
5 V_P
4 I/O
ORDERING INFORMATION
Device
NSP4201MR6T1G
Package
TSOP−6
(Pb−Free)
Shipping
3000 / Tape &
Reel
SZNSP4201MR6T1G TSOP−6 3000 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2017
1
February, 2017 − Rev. 0
Publication Order Number:
NSP4201MR6/D