NRVTSM245E Datasheet, PDF (1/5 Pages) ON Semiconductor – Surface Mount Trench Schottky Power Rectifier

NRVTSM245E
Surface Mount Trench
Schottky Power Rectifier
POWERMITE^®
Power Surface Mount Package
Features
• Low Profile − Maximum Height of 1.1 mm
• Small Footprint − Footprint Area of 8.45 mm²
• Supplied in 12 mm Tape and Reel
• Low Thermal Resistance with Direct Thermal Path of Die on
Exposed Cathode Heat Sink
• Fine Lithography Trench−based Schottky Technology for Very Low
Forward Voltage and Low Leakage
• Fast Switching with Exceptional Temperature Stability
• Low Power Loss and Lower Operating Temperature
• Higher Efficiency for Achieving Regulatory Compliance
• High Surge Capability
• NRV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
• These are Pb−Free and Halide−Free Devices
Typical Applications
• Switching Power Supplies including Adapters & Flat Panel Displays
• High Frequency and DC−DC Converters
• Freewheeling and OR−ing diodes
• Reverse Battery Protection
• Instrumentation
Mechanical Characteristics:
• Powermite is JEDEC Registered as D0−216AA
• Case: Molded Epoxy
• Epoxy Meets UL 94 V−0 @ 0.125 in
• Weight: 16.3 mg (Approximately)
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Maximum for 10 Seconds
www.onsemi.com
SCHOTTKY TRENCH
RECTIFIER
2.0 AMPERES, 45 VOLTS
CATHODE
ANODE
POWERMITE
CASE 457
MARKING DIAGRAM
M
1
E24G
2
M = Date Code
E24 = Device Code
G = Pb−Free Package
(Marking Style 1)
ORDERING INFORMATION
Device
Package
Shipping^†
NRVTSM245ET1G Powermite 3000 / Tape &
(Pb−Free)
Reel
NRVTSM245ET3G Powermite 12000 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2015
1
March, 2015 − Rev. 0
Publication Order Number:
NRVTSM245E/D