NP2600SA1 Datasheet, PDF (1/3 Pages) ON Semiconductor – BIDIRECTIONAL TSPD 50, 80, AND 100 AMP SURGE 260 VOLTS HIGH HOLD CURRENT 270 mA MIN

NP2600SA1, NP2600SB1,
NP2600SC1
Preferred Devices
Advance Information
Thyristor Surge Protector
High Voltage Bidirectional TSPD
This Thyristor Surge Protective device (TSPD) prevents
overvoltage damage to sensitive circuits from lightning, induction and
power line crossings. This is a breakover-triggered crowbar protector.
Turn-of f occurs when the surge current falls below the holding current
value.
Features
•ăHigh Surge Current Capability: 50 A, 80 A & 100 A, 10 x 1000 msec,
for Controlled Temperature Environments
•ăThe NP2600Sx is used to help equipment meet various regulatory
requirements including: Bellcore 1089, ITU K.20 & K.21, IEC 950,
UL 1459 & 1950 and FCC Part 68.
•ăBidirectional Protection in a Single Device
•ăLittle Change of Voltage Limit with Transient Amplitude or Rate
•ăFreedom from Wearout Mechanisms Present in Non-Semiconductor
Devices
•ăFail-Safe, Shorts When Overstressed, Preventing Continued
Unprotected Operation
•ăSurface Mount Technology
•ă Indicates UL Registered - File #E210057
•ăThis is a Pb-Free Device
MAXIMUM RATINGS (T_J = 25°C unless otherwise noted)
Rating
Value
Unit
Off-State Voltage - Maximum
"220
V
NP2600Sx1
x = Series Ratings
A
B
C
Maximum Pulse Surge Short Circuit
A(pk)
Current Non-Repetitive
Double Exponential Decay Waveform
(Notes 1 and 2)
2 x 10 ms 150 250 500
10 x 160 ms 90 150 200
10 x 560 ms 50 100 150
5 x 310 ms 75 100 200
10 x 1000 ms
50
80 100
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Allow cooling before testing second polarity.
2. Measured under pulse conditions to reduce heating.
3. Haefely test method.
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
http://onsemi.com
BIDIRECTIONAL TSPD ^{( )}
50, 80, AND 100 AMP SURGE
260 VOLTS
HIGH HOLD CURRENT
270 mA MIN
MT1
MT2
SMB
(No Polarity)
(JEDEC DO-214AA)
CASE 403C
MARKING
DIAGRAM
AYWW
261xG
G
261x = Device Code
x = A, B or C
A = Assembly Location
Y = Year
WW = Work Week
G = Pb-Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
NP2600SA1T3G
NP2600SB1T3G
Package
SMB
(Pb-Free)
SMB
(Pb-Free)
Shipping^†
2500/Tape & Reel
2500/Tape & Reel
NP2600SC1T3G SMB 2500/Tape & Reel
(Pb-Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Preferred devices are recommended choices for future use
and best overall value.
©Ă Semiconductor Components Industries, LLC, 2007
1
June, 2007 - Rev. P0
Publication Order Number:
NP2600S/D