NOIL1SM0300A Datasheet, PDF (1/31 Pages) ON Semiconductor – LUPA300 CMOS Image Sensor

NOIL1SM0300A
LUPA300 CMOS Image
Sensor
Features
• 640(H) x 480(V) Active Pixels (VGA Resolution)
• 9.9 mm x 9.9 mm Square Pixels (Based on the High-Fill Factor
Active Pixel Sensor Technology of FillFactory (US patent No.
6,225,670 and others)).
• Optical Format: 1/2 Optical Inch
• Pixel Rate of 80 MHz
• Frame Rate: 250 fps at Full Resolution
• On-Chip 10 bit ADCs
• Global Shutter
• Subsampling (Y Direction)
• Serial Pheripheral Interface (SPI)
• Programmable Read Out Direction (X and Y)
• Random Programmable Windowing
• Power Dissipation: 190 mW
• 48-pin LCC Package
• These Devices are Pb−Free and are RoHS Compliant
http://onsemi.com
Applications
• Machine Vision
• Motion Tracking
Figure 1. LUPA300 Package Photo
Overview
This document describes the interfacing and driving of the LUPA300 image sensor. The pixel size and resolution result in a
6.3 mm x 4.7 mm optical active area (1/2 inch).
This VGA-resolution CMOS active pixel sensor features global shutter and a maximal frame rate of 250 fps in full
resolution, where integration during readout is possible. The readout speed can be boosted by means of subsampling and
windowed Region Of Interest (ROI) readout. High dynamic range scenes can be captured using the double and multiple slope
functionality. User programmable row and column start/stop positions allow windowing. subsampling reduces resolution
while maintaining the constant field of view and an increased frame rate. The programmable gain and offset amplifier maps
the signal swing to the ADC input range. A 10-bit ADC converts the analog data to a 10-bit digital word stream. The sensor
uses a 3-wire Serial-Parallel (SPI) interface. It operates with a 3.3 V and 2.5 V power supply and requires only one master
clock for operation up to 80 MHz pixel rate. It is housed in an 48-pin ceramic LCC package.
The sensor is available in a monochrome version or Bayer (RGB) patterned color filter array.
This data sheet allows the user to develop a camera-system based on the described timing and interfacing.
ORDERING INFORMATION
Marketing Part Number
NOIL1SM0300A-QDC
NOIL1SE0300A-QDC
NOIL1SM0300A-WWC
Description
Mono with Glass
Color micro lens with Glass
Mono Wafer Sales
NOTE: For more information, see Ordering Code Information on page 27.
Package
48 pin LCC
Wafer Sales
© Semiconductor Components Industries, LLC, 2013
1
February, 2013 − Rev. 10
Publication Order Number:
NOIL1SM0300A/D