|
NCP1573 Datasheet, PDF (1/17 Pages) ON Semiconductor – Low Voltage Synchronous Buck Controller | |||
|
NCP1573
Low Voltage Synchronous
Buck Controller
The NCP1573 is a low voltage buck controller. It provides the
control for a DCâDC power solution producing an output voltage as
low as 0.980 V over a wide current range. The NCP1573âbased
solution is powered from 12 V with the output derived from a 2â7 V
supply. It contains all required circuitry for a synchronous NFET buck
regulator using the V2⢠control method to achieve the fastest possible
transient response and best overall regulation. NCP1573 operates at a
fixed internal 200 kHz frequency and is packaged in an SOâ8.
This device provides Power Good with delay and builtâin adaptive
nonâoverlap.
Features
⢠0.980 V ± 1.0% Reference Voltage
⢠V2 Control Topology
⢠200 ns Transient Response
⢠Power Good
⢠Programmable Power Good Delay
⢠40 ns Gate Rise and Fall Times (3.3 nF Load)
⢠Adaptive FET NonâOverlap Time
⢠Fixed 200 kHz Oscillator Frequency
⢠On/Off Control Through Use of the COMP Pin
⢠Overvoltage Protection through Synchronous MOSFETs
⢠Synchronous NâChannel Buck Design
⢠Dual Supply, 12 V Control, 2â7 V Power Source
http://onsemi.com
8
1
SOâ8
D SUFFIX
CASE 751
PIN CONNECTIONS AND
MARKING DIAGRAM
1
VCC
PWRGD
PGDELAY
COMP
8
GND
VFB
GATE(L)
GATE(H)
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
ORDERING INFORMATION
Device
Package
Shipping
NCP1573D
SOâ8
98 Units/Rail
NCP1573DR2
SOâ8 2500 Tape & Reel
© Semiconductor Components Industries, LLC, 2006
1
July, 2006 â Rev. 4
Publication Order Number
NCP1573/D
|
▷ |