|
NBSG16M Datasheet, PDF (1/12 Pages) ON Semiconductor – 2.5V/3.3V Multilevel Input to CML Clock/Data Receiver/Driver/Translator Buffer | |||
|
NBSG16M
2.5V/3.3V Multilevel Input
to CML Clock/Data
Receiver/Driver/Translator
Buffer
The NBSG16M is a differential current mode logic (CML)
receiver/driver/translator buffer. The device is functionally equivalent
to the EP16, LVEP16, or SG16 devices with CML output structure and
lower EMI capabilities.
Inputs incorporate internal 50 W termination resistors and accept
LVNECL (Negative ECL), LVPECL (Positive ECL), LVTTL,
LVCMOS, CML, or LVDS. The CML output structure contains
internal 50 W source termination resistor to VCC. The device
generates 400 mV output amplitude with 50 W receiver resistor to
VCC.
The VBB pin is internally generated voltage supply available to this
device only. For all singleâended input conditions, the unused
complementary differential input is connected to VBB as a switching
reference voltage. VBB may also rebias AC coupled inputs. When
used, decouple VBB via a 0.01 mF capacitor and limit current sourcing
or sinking to 0.5 mA. When not used, VBB output should be left open.
⢠Maximum Input Clock Frequency > 10 GHz Typical
⢠Maximum Input Data Rate > 10 Gb/s Typical
⢠120 ps Typical Propagation Delay
⢠35 ps Typical Rise and Fall Times
⢠Positive CML Output with Operating Range: VCC = 2.375 V to
3.465 V with VEE = 0 V
⢠Negative CML Output with RSNECL or NECL Inputs with
Operating Range: VCC = 0 V with VEE = â2.375 V to â3.465 V
⢠CML Output Level; 400 mV PeakâtoâPeak Output with
50 W Receiver Resistor to VCC
⢠50 W Internal Input and Output Termination Resistors
⢠Compatible with Existing 2.5 V/3.3 V LVEP, EP, LVEL
and SG Devices
⢠VBB Reference Voltage Output
http://onsemi.com
MARKING
DIAGRAM*
QFNâ16
MN SUFFIX
CASE 485G
SG
16M
ALYW
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
Device
Package
Shippingâ
NBSG16MMN
3x3 mm
QFNâ16
123 Units / Rail
NBSG16MMNR2
3x3 mm 3000/Tape & Reel
QFNâ16
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2004
1
April, 2004 â Rev. 3
Publication Order Number:
NBSG16M/D
|
▷ |