|
N25S818HA_12 Datasheet, PDF (1/12 Pages) ON Semiconductor – 256 kb Low Power Serial SRAMs | |||
|
N25S818HA
256 kb Low Power Serial
SRAMs
32 k x 8 Bit Organization
Introduction
The ON Semiconductor serial SRAM family includes several
integrated memory devices including this 256 kb serially accessed
Static Random Access Memory, internally organized as 32 k words by
8 bits. The devices are designed and fabricated using
ON Semiconductorâs advanced CMOS technology to provide both
highâspeed performance and low power. The devices operate with a
single chip select (CS) input and use a simple Serial Peripheral
Interface (SPI) serial bus. A single data in and data out line is used
along with a clock to access data within the devices. The N25S818HA
devices include a HOLD pin that allows communication to the device
to be paused. While paused, input transitions will be ignored. The
devices can operate over a wide temperature range of â40°C to +85°C
and can be available in several standard package offerings.
Features
⢠Power Supply Range: 1.7 to 1.95 V
⢠Very Low Standby Current: Typical Isb as low as 200 nA
⢠Very Low Operating Current: As low as 3 mA
⢠Simple Memory Control:
Single chip select (CS)
Serial input (SI) and serial output (SO)
⢠Flexible Operating Modes:
Word read and write
Page mode (32 word page)
Burst mode (full array)
⢠Organization: 32 k x 8 bit
⢠Self Timed Write Cycles
⢠Builtâin Write Protection (CS High)
⢠HOLD Pin for Pausing Communication
⢠High Reliability: Unlimited write cycles
⢠Green SOIC and TSSOP
⢠These Devices are PbâFree, Halogen Free/BFR Free and are RoHS
Compliant
http://onsemi.com
MARKING
DIAGRAMS
TSSOPâ8
T SUFFIX
CASE 948AL
C124
XXXXYZZ
SOICâ8
S SUFFIX
CASE 751BD
C114
XXXXYZZ
XXXX = Date Code
Y
= Assembly Code
ZZ
= Lot Traceability
ORDERING INFORMATION
Device
Package
Shippingâ
N25S818HAS21I
SOICâ8 100 Units / Tube
(PbâFree)
N25S818HAT21I
TSSOPâ8 100 Units / Tube
(PbâFree)
N25S818HAS21IT SOICâ8 3000 / Tape &
(PbâFree)
Reel
N25S818HAT21IT TSSOPâ8 3000 / Tape &
(PbâFree)
Reel
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2012
1
June, 2012 â Rev. 12
Publication Order Number:
N25S818HA/D
|
▷ |