MT9M024 Datasheet, PDF (1/65 Pages) ON Semiconductor – CMOS Digital Image Sensor

MT9M024: 1/3-Inch CMOS Digital Image Sensor
Features
1/3-Inch CMOS Digital Image Sensor
MT9M024 Data Sheet, Rev. G
For the latest data sheet, please visit www.onsemi.com
Features
• Superior low-light performance
• HD video (720p60)
• Linear or high dynamic range capture
• Video/Single Frame modes
• On-chip AE and statistics engine
• Parallel and serial output
• Auto black level calibration
• Context switching
• Temperature Sensor
Applications
• Video surveillance
• 720p60 video applications
• High dynamic range imaging
General Description
The ON Semiconductor MT9M024 is a 1/3-inch CMOS
digital image sensor with an active-pixel array of
1280H x 960V. It captures images in either linear or
high dynamic range modes, with a rolling-shutter
readout. It includes sophisticated camera functions
such as auto exposure control, windowing, and both
video and single frame modes. It is designed for both
low light and high dynamic range scene performance.
It is programmable through a simple two-wire serial
interface. The MT9M024 produces extraordinarily
clear, sharp digital pictures, and its ability to capture
both continuous video and single frames makes it the
perfect choice for a wide range of applications, includ-
ing surveillance and HD video.
Table 1:
Key Parameters
Parameter
Optical format
Active pixels
Pixel size
Color filter array
Shutter type
Input clock range
Output clock maximum
Output
Serial
Parallel
Frame
rate
Full resolution
720p
Responsivity
SNR_MAX
Maximum dynamic range
Supply
voltage
I/O
Digital
Analog HiSPi
Power consumption
(typical)
Operating temperature
(ambient) -T_A
Package options
Typical Value
1/3-inch (6 mm)
1280 x 960 = 1.2 Mp
3.75m
RGB Bayer or monochrome
Electronic rolling shutter
6 – 50 MHz
74.25 MHz
HiSPi 12-, 14-, or 20-bit
12-bit
45 fps
60 fps
5.48 V/lux-sec
43.9 dB
>115 dB
1.8 or 2.8V*
1.8 V
2.8 V0.4 V or 1.8 V
270 mW (1280 x 720
60 fps Parallel output Linear
Mode)
460 mW (1280 x 720 60 fps
Parallel output HDR Mode)
–30°C to + 70° C (surveillance)
9x9 mm iBGA
Bare die
*1.8V VDD_IO is recommended due to better row noise per-
formance
MT9M024_DS Rev. G Pub. 4/15 EN
1
©Semiconductor Components Industries, LLC,2015