MGP11N60ED Datasheet, PDF (1/6 Pages) ON Semiconductor – SHORT CIRCUIT RATED LOW ON-VOLTAGE

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
™ Designer's Data Sheet
Insulated Gate Bipolar Transistor
with Anti-Parallel Diode
N–Channel Enhancement–Mode Silicon Gate
This Insulated Gate Bipolar Transistor (IGBT) is co–packaged
with a soft recovery ultra–fast rectifier and uses an advanced
termination scheme to provide an enhanced and reliable high
voltage–blocking capability. Its new 600 V IGBT technology is
specifically suited for applications requiring both a high tempera-
ture short circuit capability and a low VCE(on). It also provides fast
switching characteristics and results in efficient operation at high
frequencies. Co–packaged IGBTs save space, reduce assembly
time and cost. This new E–series introduces an energy efficient,
ESD protected, and rugged short circuit device.
C
• Industry Standard TO–220 Package
• High Speed: Eoff = 60 mJ per Amp typical at 125°C
• High Voltage Short Circuit Capability – 10 ms minimum at
G
125°C, 400 V
• Low On–Voltage — 2.0 V typical at 8.0 A
• Soft Recovery Free Wheeling Diode is included in the Package
• Robust High Voltage Termination
• ESD Protection Gate–Emitter Zener Diodes
E
Order this document
by MGP11N60ED/D
MGP11N60ED
IGBT & DIODE IN TO–220
11 A @ 90°C
15 A @ 25°C
600 VOLTS
SHORT CIRCUIT RATED
LOW ON–VOLTAGE
G
C
E
CASE 221A–09
STYLE 9
TO–220AB
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Collector–Emitter Voltage
Collector–Gate Voltage (RGE = 1.0 MΩ)
Gate–Emitter Voltage — Continuous
Collector Current — Continuous @ TC = 25°C
— Continuous @ TC = 90°C
— Repetitive Pulsed Current (1)
Total Power Dissipation @ TC = 25°C
Derate above 25°C
VCES
VCGR
VGE
IC25
IC90
ICM
PD
600
Vdc
600
Vdc
± 20
Vdc
15
Adc
11
22
Apk
96
Watts
0.77
W/°C
Operating and Storage Junction Temperature Range
Short Circuit Withstand Time
(VCC = 400 Vdc, VGE = 15 Vdc, TJ = 125°C, RG = 20 Ω)
Thermal Resistance — Junction to Case – IGBT
— Junction to Case – Diode
— Junction to Ambient
Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 5 seconds
Mounting Torque, 6–32 or M3 screw
TJ, Tstg
– 55 to 150
°C
tsc
10
ms
R_θJC
R_θJC
R_θJA
TL
1.3
2.3
65
260
10 lbfSin (1.13 NSm)
°C/W
°C
(1) Pulse width is limited by maximum junction temperature. Repetitive rating.
Designer’s Data for “Worst Case” Conditions — The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit
curves — representing boundaries on device characteristics — are given to facilitate “worst case” design.
Designer’s™ is a trademark of Motorola, Inc.
© ^MMo^oto^toro^rl^oa,^laInc^IG. 1^B99^T8 ^{Device Data}
1