MC10EP131 Datasheet, PDF (1/10 Pages) ON Semiconductor – 3.3V / 5V ECL Quad D Flip-Flop with Set, Reset, and Differential Clock

MC10EP131, MC100EP131
3.3V / 5V ECL Quad D
Flip−Flop with Set, Reset,
and Differential Clock
The MC10/100EP131 is a Quad Master−slaved D flip−flop with
common set and separate resets. The device is an expansion of the
E131 with differential common clock and individual clock enables.
With AC performance faster than the E131 device, the EP131 is ideal
for applications requiring the fastest AC performance available.
Each flip−flop may be clocked separately by holding Common
Clock (C_C) LOW and C_C HIGH, then using the differential Clock
Enable inputs for clocking (C_0−3, C_0−3).
Common clocking is achieved by holding the differential inputs
C_0−3 LOW and C_0−3 HIGH while using the differential Common
Clock (C_C) to clock all four flip−flops. When left floating open, any
differential input will disable operation due to input pulldown resistors
forcing an output default state.
Individual asynchronous resets (R_0−3) and an asynchronous set
(SET) are provided.
Data enters the master when both C_C and C_0−3 are LOW, and
transfers to the slave when either C_C or C_0−3 (or both) go HIGH.
The 100 Series contains temperature compensation.
• 460 ps Typical Propagation Delay
• Maximum Frequency > 3 GHz Typical
• Differential Individual and Common Clocks
• Individual Asynchronous Resets
• Asynchronous Set
• PECL Mode Operating Range: V_CC = 3.0 V to 5.5 V
with V_EE = 0 V
• NECL Mode Operating Range: V_CC = 0 V
with V_EE = −3.0 V to −5.5 V
• Open Input Default State
• Safety Clamp on Inputs
• Q Output Will Default LOW with Inputs Open or at V_EE
http://onsemi.com
MARKING
DIAGRAM*
LQFP−32
FA SUFFIX
CASE 873A
32
MCXXX
EP131
AWLYYWW
1
XXX = 10 or 100
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
*For additional information, see Application Note
AND8002/D
ORDERING INFORMATION
Device
Package
Shipping^†
MC10EP131FA
LQFP−32 250 Units/Tray
MC10EP131FAR2 LQFP−32 2000 Tape & Reel
MC100EP131FA LQFP−32 250 Units/Tray
MC100EP131FAR2 LQFP−32 2000 Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2004
1
January, 2004 − Rev. 7
Publication Order Number:
MC10EP131/D