|
LC898121XA Datasheet, PDF (1/6 Pages) ON Semiconductor – Optical Image Stabilization / Controller & Driver | |||
|
LC898121XA
CMOS LSI
Optical Image Stabilization (OIS)
Controller & Driver
www.onsemi.com
Overview
The LC898121XA is a system LSI integrating a digital signal
processing function for Optical Image Stabilization (OIS) and a
saturation-driven H bridge driver function.
Function
ï¾ Digital signal processing
ï· Built-in digital servo circuit
ï· Built-in Gyro filter
ï· AD converter
ï¡ 12bit
ï¡ Input 3ch
ï¡ Equipped with a sample-hold circuit
ï· DA converter
ï¡ 8bit
ï¡ Output 2ch
ï· Built-in Serial I/F circuit
(4-wire SPI or 2-wire I2C-Bus interface)
ï· Built-in Hall Bias circuit
ï· Built-in Hall Amp
ï· Built-in OSC (Oscillator)
ï¡ Typ. 48MHz
ï· Built-in LDO (Low Drop-Out regulator)
ï¡ Generation Logic Power (typ 1.8V)
ï· Digital Gyro I/F for the companies
(Please refer for the details)
WLCSP40, 2.44x3.94
ï¾ Motor Driver
ï· Saturation-drive H bridge ï´2ch
ï· IO max : 300mA
ï¾ Package
ï· WLCSP40, 2.44mm ï´ 3.94mm,
thickness max 0.65mm
ï· Pb-Free / Halogen Free
ï¾ Power Supply Voltage
ï· DA/VGA : DAOPVDD = 2.6V to 3.6V
ï· AD
: ADVDD = 2.6V to 3.6V
ï· IO/OSC/LDO : DVDD30 = 2.6V to 3.6V
ï· Driver
: VM = 2.6V to 5.5V
ï· Core Logic : Use built-in LDO/External VDD :
DVDD18 = 1.8Vï±10%
* I2C Bus is a trademark of Philips Corporation.
ORDERING INFORMATION
See detailed ordering and shipping information on page 6 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
April 2015 - Rev. 2
Publication Order Number :
LC898121XA/D
|
▷ |