|
LC898111AXB_15 Datasheet, PDF (1/6 Pages) ON Semiconductor – Optical Image Stabilization (OIS) Controller & Driver | |||
|
LC898111AXB
CMOS LSI
Optical Image Stabilization (OIS)
Controller & Driver
www.onsemi.com
Overview
The LC898111AXB is Optical Image Stabilization (OIS) system
control LSI for smartphone camera modules.
The LSI have built-in digital signal processing circuits, such as a 2ch
saturation H-Bridge Driver and a Flexible Filter circuit, and control
VCM type actuators.
The LC898111AXB is identical LSI except for the dimensions, i.e.
XB has WLP thickness, max. 0.69 mm with B/C.
WLCSP48, 3.22x2.57
Function
ï¾Digital signal processing LSI (Logic LSI)ï
ï· Built-in digital servo circuit
ï· Built-in Gyro filter
ï· AD converter
ï· 12-bit
ï· input 5ch
ï· Equipped with a sample-hold circuit
ï· DA converter
ï· 8-bit
ï· Output 2ch (Constant current Bias : max 7mA)
ï· Built-in Serial I/F circuit
(2-wire I2C-Bus or 4-wire SPI Bus interface)
ï· Built-in Hall Bias circuit
ï· Built-in Hall Amp
(Gain of Opamp : x25, x50, x75, x100, x150, x200)
ï· Built-in OSC (Oscillator)
48MHz ï± 5% (Frequency adjustment function)
ï· External Clock input is possible
from TSTCLK (48MHz ï± 5%)
ï· Built-in LDO (Low Drop-Out regulator)
ï· Digital Gyro I/F for the companies (SPI Bus)
(Please refer for the details)
ï· Support Hall sensor and Photo Reflector as means
to detect a position
ï¾Motor Driver
ï· Saturation-drive H bridge x2ch
ï· IO max : 220mA
ï¾ Package
ï· WLCSP48, 3.22mm x 2.57mm,
thickness max 0.69mm, with B/C
ï· Pb-Free
ï· Halogen Free
ï¾Power supply voltage
ï· Logic : DVDD30 = 2.6 to 3.6 V
ï· Driver : VM = 2.6 to 3.6 V
* I2C Bus is a trademark of Philips Corporation.
ORDERING INFORMATION
See detailed ordering and shipping information on page 6 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
April 2015 - Rev. 1
Publication Order Number :
LC898111AXB/D
|
▷ |