DTA114EM3T5G Datasheet, PDF (1/12 Pages) ON Semiconductor – Digital Transistors (BRT) PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network

DTA114EM3T5G Series
Preferred Devices
Digital Transistors (BRT)
PNP Silicon Surface Mount Transistors
with Monolithic Bias Resistor Network
This new series of digital transistors is designed to replace a single
device and its external resistor bias network. The digital transistor
contains a single transistor with a monolithic bias network consisting
of two resistors; a series base resistor and a base−emitter resistor. The
digital transistor eliminates these individual components by
integrating them into a single device. The use of a digital transistor can
reduce both system cost and board space. The device is housed in the
SOT−723 package which is designed for low power surface mount
applications.
• Simplifies Circuit Design
• Reduces Board Space
• Reduces Component Count
• The SOT−723 Package can be Soldered using Wave or Reflow.
• Available in 4 mm, 8000 Unit Tape & Reel
• These are Pb−Free Devices
MAXIMUM RATINGS (T_A = 25°C unless otherwise noted)
Rating
Symbol
Value
Collector-Base Voltage
Collector-Emitter Voltage
Collector Current
V_CBO
50
V_CEO
50
I_C
100
Unit
Vdc
Vdc
mAdc
http://onsemi.com
PNP SILICON
DIGITAL
TRANSISTORS
PIN 1
R1
BASE
(INPUT) _R2
PIN 3
COLLECTOR
(OUTPUT)
PIN 2
EMITTER
(GROUND)
3
1
2
SOT−723
CASE 631AA
Style 1
MARKING
DIAGRAM
XX M
xx = Specific Device Code
(See Marking Table on page 2)
M = Date Code
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
© Semiconductor Components Industries, LLC, 2004
1
February, 2004 − Rev. 0
Publication Order Number:
DTA114EM3/D