CS5165H Datasheet, PDF (1/21 Pages) Cherry Semiconductor Corporation – Fast, Precise 5-Bit Synchronous Buck Controller for the Next Generation Low Voltage Pentium II Processors

CS5165H
5−Bit Synchronous CPU
Buck Controller
The CS5165H synchronous 5−bit NFET buck controller is optimized
to manage the power of the next generation Pentium II processors. It’s
V²â„¢ control architecture delivers the fastest transient response (100 ns),
and best overall voltage regulation in the industry today. It’s feature rich
design gives end users the maximum flexibility to implement the best
price/performance solutions for their end products.
The CS5165H has been carefully crafted to maximize performance
and protect the processor during operation. It has a 5−bit DAC on
board that holds a ±1.0% tolerance over temperature. Its on board
programmable Soft Start insures a control start up, and the FET
nonoverlap circuitry ensures that both FETs do not conduct simultaneously.
The on board oscillator can be programmed up to 1.0 MHz to give
the designer maximum flexibility in choosing external components
and setting systems costs.
The CS5165H protects the processor during potentially catastrophic
events like overvoltage (OVP) and short circuit. The OVP feature is
part of the V² architecture and does not require any additional
components. During short circuit, the controller pulses the MOSFETs
in a “hiccup” mode (3.0% duty cycle) until the fault is removed. With
this method, the MOSFETs do not overheat or self destruct.
The CS5165H is designed for use in both single processor desktop
and multiprocessor workstation and server applications. The IC can be
powered from either single or dual 5.0 V, 12 V power supplies. The
CS5165H’s current sharing capability allows the designer to build multiple
parallel and redundant power solutions for multiprocessor systems.
The CS5165H contains other control and protection features such as
Power Good, ENABLE, and adaptive voltage positioning. It is
available in a 16 lead SOIC wide body package.
Features
• V² Control Topology
• 100 ns Controller Transient Response
• Excess of 1.0 MHz Operation
• 5−Bit DAC with 1.0% Tolerance
• Power Good Output With Internal Delay
• Enable Input Provides Micropower Shutdown Mode
• 5.0 V & 12 V Operation Using Either Dual or Single Supplies
• Adaptive Voltage Positioning
• Remote Sense Capability
• Current Sharing Capability
• V_CC Monitor
• Hiccup Mode Short Circuit Protection
• Overvoltage Protection (OVP)
• Programmable Soft Start
• 150 ns PWM Blanking
• 65 ns FET Nonoverlap Time
• 40 ns Gate Rise and Fall Times (3.3 nF Load)
http://onsemi.com
16
1
SO−16L
DW SUFFIX
CASE 751G
MARKING
DIAGRAM
16
CS5165H
AWLYYWW
1
A
WL, L
YY, Y
WW, W
= Assembly Location
= Wafer Lot
= Year
= Work Week
PIN CONNECTIONS
1
V_ID0
V_ID1
V_ID2
V_ID3
SS
V_ID4
C_OFF
ENABLE
16
V_FB
COMP
LGND
PWRGD
GATE(L)
PGND
GATE(H)
V_CC
ORDERING INFORMATION
Device
Package
Shipping
CS5165HGDW16 SO−16L 46 Units/Rail
CS5165HGDWR16 SO−16L 1000 Tape & Reel
© Semiconductor Components Industries, LLC, 2006
1
July, 2006 − Rev. 5
Publication Order Number:
CS5165H/D