|
CAT93C86B Datasheet, PDF (1/14 Pages) ON Semiconductor – 16-Kb Microwire Serial EEPROM | |||
|
CAT93C86B
16-Kb Microwire Serial
EEPROM
Description
The CAT93C86B is a 16âKb Serial EEPROM memory device
which is configured as either registers of 16 bits (ORG pin at VCC) or 8
bits (ORG pin at GND). Each register can be written (or read) serially
by using the DI (or DO) pin. The CAT93C86B features a selfâtimed
internal write with autoâclear. Onâchip PowerâOn Reset circuit
protects the internal logic against powering up in the wrong state.
Features
⢠High Speed Operation: 4 MHz (5 V), 2 MHz (1.8 V)
⢠1.8 V (1.65 V*) to 5.5 V Supply Voltage Range
⢠Selectable x8 or x16 Memory Organization
⢠Selfâtimed Write Cycle with Autoâclear
⢠Sequential Read
⢠Hardware and Software Write Protection
⢠Powerâup Inadvertent Write Protection
⢠Low Power CMOS Technology
⢠Program Enable (PE) Pin
⢠1,000,000 Program/Erase Cycles
⢠100 Year Data Retention
⢠Industrial and Extended Temperature Ranges
⢠8âpin PDIP, SOIC, MSOP, TSSOP, 8âpad UDFN, and WLCSP
6âball Packages
⢠This Device is PbâFree, Halogen Free/BFR Free, and RoHS
Compliantâ
VCC
ORG
DI
CS
CAT93C86B
DO
SK
PE
GND
Figure 1. Functional Symbol
*CAT93C86BxxâxxL (TA = â205C to +855C)
â For additional information on our PbâFree strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2013
1
September, 2013 â Rev. 3
http://onsemi.com
MSOPâ8
Z SUFFIX
CASE 846AD
SOICâ8
X SUFFIX
CASE 751BE
UDFNâ8
HU4 SUFFIX
CASE 517AZ
WLCSPâ6
C6A SUFFIX
PRELIMINARY
PDIPâ8
L SUFFIX
CASE 646AA
TSSOPâ8
Y SUFFIX
CASE 948AL
SOICâ8
V SUFFIX
CASE 751BD
PIN CONFIGURATION
CS 1
SK
DI
VCC
PE
ORG
Pin 1 1 2
A VCC CS
B SK DI
DO
GND
C GND DO
PDIP (L), SOIC (V, X),
TSSOP (Y),
UDFN (HU4), MSOP (Z)
WLCSP*, ** (C6A)
*ORG internally
connected to GND
**PE float
PIN FUNCTION
Pin Name
Function
CS
Chip Select
SK
Clock Input
DI
Serial Data Input
DO
Serial Data Output
VCC
GND
Power Supply
Ground
ORG
Memory Organization
PE
Program Enable
Note: When the ORG pin is connected to VCC, the
x16 organization is selected. When it is connected
to ground, the x8 pin is selected. If the ORG pin is
left unconnected, then an internal pullâup device will
select the x16 organization.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 14 of this data sheet.
Publication Order Number:
CAT93C86B/D
|
▷ |